Page 2
POOL AND SPA LIGHT HOUSING COMPATIBILITY INSTALLED ON A 120VAC CIRCUIT. LLWP-12-3 LLWP-120-3 LLWS-12-1 LLWS-120-1 Halco ProLED® White LED Pool and Spa lamps must be installed in a compatible Halco ProLED White LED Pool and spa lamps are available in 12VAC (low voltage) and ®...
Page 3
Pool Deck Surface To GFCI, Circuit Install Halco ProLED White LED lamp. ® Step 1 Breaker and Power Remove the old lamp and discard. Carefully screw the Halco ProLED White LED ® Source lamp into the socket. STEP 6 The niche assembly Reassemble the light housing.
Page 4
White LED Pool lamp. If you do see air bubbles rising to the surface at any ® fails to operate due to a defect in material or workmanship, Halco will, at its option, repair or replace the time during the inspection process, immediately remove the Halco ProLED White ®...
Need help?
Do you have a question about the ProLED Spa Lamp and is the answer not in the manual?
Questions and answers