Advertisement
Troubleshooting wireless charging
Problems may occur when charging or charging may not start If the thickness
of the smartphone's case exceeds 5mm or it has a metal composition, try
removing the case before charging.
• Phones with Qi function may need to be placed slightly off centre. Optimum
charging position can vary by brand/model.
• The charging time varies depending on the charging capacity of the battery
and its current residual capacity.
• Components may heat up during the charging process. They will slowly cool
down again after the charging process has finished.
Protection function
1. Current output, overload protection. After an output overload
protection is triggered, charging will stop and the light will go out.
To restore power unplug power supply from mains and plug back in.
Specifications
Power Supply Input:
LED Lamp Power Input (6):
Wireless Output: (7)
USB 2.0 Output 1 (6):
Rated Power of Unit:
Rated Power of LED:
LED Colour Modes:
Colour Temperature:
Colour Rendering Index (CRI):
Luminance:
Technical Support
For further advice please visit our technical website at
http://www.philex.com/support
Waste electrical and electronic products should
not be disposed of with household waste.
Please recycle where facilities exist. Check with
your Local Authority for recycling advice.
Made In China © Philex Electronic Ltd. Kingfisher Wharf,
6
London Road, Bedford, MK42 0NX UK. 2019 V1.1
LED DESK LAMP - User Guide
100-240V~50/60Hz
12V��2A
5W
5V��1A
21W max.
4.5W
Natural/Cool/Warm White
2700-6500K
Ra≥90
≥1000 Lux max.
www.philex.com
Advertisement
