Installation Installation Caution! The Internet connection of the HDG Control Touch XL must be im- plemented by the customer via router or network! ETWORK CONNECTION Abbildung 2/1 - Network cable Connect the network cable (1) WAN interface on the back of the control unit HDG Control Pro.
Page 3
Press the button Login (1). ✓ You are on the MyHDG-page. Figure 2/5 - MyHDG-page Press the button Start HDG WebControl (1). ✓ You are on the boiler selection page. DD BOILER You are now registered as a user and have successfully logged in.
Figure 2/7 - Activate boiler The MAC address is the unique identification for your HDG Control Pro. You will find it in the control unit HDG Control Pro, „Main menu“ -> „Network“ -> „MAC“ or alternatively on the back of the control unit at „MAC WAN“.
Set Email notification 16.Press onto the boiler (1). ✓ The user interface of your system is displayed. ✓ You can exit the user interface again by clicking the „Boiler selec- tion“ icon. Set Email notification Abbildung 2/10 - Benachrichtigungen Press in the header line on Main menu (1). Press the button Messaging (1).
Page 6
Setting up the E-Mail-Server Setting up the E-Mail-Server Tipp! If the sending of e-mail notifications does not work, it must be en- sured that our required e-mail server "postausgang.idowa.net" is in- cluded in the list of secure e-mail servers for the router used. If it is not possible to set up e-mail transmission, please contact your provider!
Need help?
Do you have a question about the Control Pro and is the answer not in the manual?
Questions and answers