Configuration With A Custom Server - Efento HC5 User Manual

4. Configure alert rules, which will send you SMS / email notification, if the values measured by the
logger are out of the safe range or if the logger data do not reach the platform. In the Efento
mobile app go to the Main menu and select "Alarm rules" tab, set up the rule and save the
changes.
If you set a rule for the logger (e.g. humidity over 40% RH), the value will be sent to
the logger during the next communication. From that moment on, if the measured
value exceeds the threshold, the logger will send the data to Efento Cloud
immediately, no matter what is the transmission interval.

Configuration with a custom server

Efento NB-IoT loggers send data using the CoAP protocol (​
CoAP is a lightweight UDP based data exchange protocol that is one of the standard IoT protocols. The
data is sent in Protobuf format, which, thanks to its low overhead, is also very convenient for sending
data by Internet of Things devices.
Efento loggers can be easily integrated with any server application. Integration allows users to access all
the loggers' features in their application - this includes both receiving the data from the loggers and
remotely configuring the devices. A detailed description of the data format sent in Protobuf is available in
the "Efento NB-IoT Loggers Integration Manual". We can also provide you with a demo source code,
which you can run on your server in order to communicate with Efento NB-IoT loggers. Should you have
any questions about the integration, please contact our ​
The initial configuration of Efento NB-IoT loggers is done with ​
devices that can be downloaded from Google Play. The application allows you to configure all
parameters of the logger and read the measurements from the logger's memory. After that, the
configuration can be either done locally or remotely, from a server.
After downloading and launching the app select the "Nearby devices" mode, you will see all the loggers
that are in your mobile device's range.
Tap on the main menu icon (three lines in the upper left corner) and quickly tap Efento ogo 10 times.
This will activate the Power user mode and give you access to full configuration of Efento loggers.
Activate Power user mode to get access to full configuration options of Efento
loggers. To activate Power user mode, quickly tap 10 times on the Efento logo in
the Efento application main menu.
www.getefento.com​ | +48 574 753 980 | efento@efento.pl
R FC 7252 Constrained Application Protocol).
s upport team​ .
E fento mobile application for Android
Efento SP. J.
Ul.Krupnicza 14/5
31-123 Kraków
8