HEAT- GX/HOT-G X SUPERMAX+ POWER PACK INSTRUCTION FOR USE INTRODUCTION TAB LE OF CONTENTS: Congratulations on your purchase of HEAT-G X by ZANIER, the rst Package contents ........1 glove worldwide with adjustable, processor-controlled heating. Safety precautions ........1 Please read the instructions for use carefully before rst using the Technical data ..........
Children should use the unit only under the supervision of adults. • Powerpacks are water-resistant. They should always be connected to your ZANIER gloves when outdoors (even if not switched on), to prevent the ingress of moisture or dirt into the socket or plug.
TECHNICAL DATA Charger (available accessory): Input: 110 V-240V ~ (50/60 Hz), 400mA Output: 2x (6V / 500 mA) FIRST USE AND CHARGING THE POWERPACKS Preparing the Charger: Press the appropriate adapter into the slot on the back of the charger until it locks in with an audible click.
The Powerpack is now completely switched o . • IN USE: The Powerpack is supplying the connected ZANIER gloves with power. Each Power- pack can be individually set to one of three di erent heat levels. The device display (red L ED) turns on.
SERVICE , STORA GE AND CARE OF THE POWERPACKS To provide for long product life, store the Powerpacks fully charged, turned o (level “0”) and disconnected from gloves and the charger in a dry place at room temperature. Clean all parts and gloves as needed with a soft, slightly damp cloth and a mild cleanser. ATTENTION : Always remove the charger from the outlet before cleaning it.