Advertisement
Advertisement
Summary of Contents for ZANIER HEAT-GX Supermax+
-
Page 2: Table Of Contents
HEAT- GX/HOT-G X SUPERMAX+ POWER PACK INSTRUCTION FOR USE INTRODUCTION TAB LE OF CONTENTS: Congratulations on your purchase of HEAT-G X by ZANIER, the rst Package contents ........1 glove worldwide with adjustable, processor-controlled heating. Safety precautions ........1 Please read the instructions for use carefully before rst using the Technical data .......... -
Page 3: Package Contents
Children should use the unit only under the supervision of adults. • Powerpacks are water-resistant. They should always be connected to your ZANIER gloves when outdoors (even if not switched on), to prevent the ingress of moisture or dirt into the socket or plug. -
Page 4: Technical Data
TECHNICAL DATA Charger (available accessory): Input: 110 V-240V ~ (50/60 Hz), 400mA Output: 2x (6V / 500 mA) FIRST USE AND CHARGING THE POWERPACKS Preparing the Charger: Press the appropriate adapter into the slot on the back of the charger until it locks in with an audible click. -
Page 5: Description Of Functions
The Powerpack is now completely switched o . • IN USE: The Powerpack is supplying the connected ZANIER gloves with power. Each Power- pack can be individually set to one of three di erent heat levels. The device display (red L ED) turns on. -
Page 6: Service, Storage And Care Of The Powerpacks
SERVICE , STORA GE AND CARE OF THE POWERPACKS To provide for long product life, store the Powerpacks fully charged, turned o (level “0”) and disconnected from gloves and the charger in a dry place at room temperature. Clean all parts and gloves as needed with a soft, slightly damp cloth and a mild cleanser. ATTENTION : Always remove the charger from the outlet before cleaning it.