Advertisement
Quick Links
HIPPO
Quick installation and programming guide
This quick guide is a summary of the complete installation guide. The guide contains safety warnings and other
IMPORTANT
explanations that must be taken into account. The most recent versions of this guide and the installation
NOTE
manual are available in the "Downloads" section on Erreka's website.
http://www.erreka-automation.com
ELECTRICAL WIRING:
Element
A: Main power supply
B: Flashing light
C: Photocells (Tx/Rx)
D: Key switch
E: Operator
(motor + limit switch + microswitch STP)
F: Antenna
Full installation elements
No. wires per section
2
5x1.5mm
2
2x0.5 mm
2
2x0.5 mm
/ 4x0.5mm
2
2x0.5 mm
2
4x1.5mm
+3x0.5mm
Coaxial cable 50k (RG-58/U)
Maximum length
30m
30m
2
30m
25m
2
2
+2x0.5mm
20m
5m
English
E310B
5
Advertisement
Summary of Contents for Gerreka HIPPO
- Page 1 HIPPO Quick installation and programming guide English This quick guide is a summary of the complete installation guide. The guide contains safety warnings and other IMPORTANT explanations that must be taken into account. The most recent versions of this guide and the installation NOTE manual are available in the "Downloads"...
- Page 2 Unlocking and locking Unlocking (manual operation) Locking (motorised operation) 1 Turn the key (1) and remove the cover (2). 1 Turn the key (3) anti-clockwise to lock. 2 Insert the hexagonal key (3) supplied in the socket (4). 2 Remove the key (3). 3 Turn the key (3) clockwise to unlock.
- Page 3 Assembly Fold the stringers properly, as Fasten the stringers on the base Dig a well to the correct size and shown in the diagram. plate temporarily, without fully position the duct for the cables tightening the nuts, as they must and the base plate with the be removed later.
- Page 4 The operator must be connected to the control panel as shown in the attached diagram. To connect the rest of the elements of the installation, consult your control panel instructions. HIPPO operator parts: VIVO-T101 control board parts: movement 1 limit switch...
Need help?
Do you have a question about the HIPPO and is the answer not in the manual?
Questions and answers