Summary of Contents for ICI Caldaie ICI Kronos
- Page 1 Библиотека СОК INSTRUCTIONS FOR USER, INSTALLER AND TECHNICAL SERVICE CENTRE NEREIX ICI Kronos ICI Kronos REV. 6 (FW 0.1) 08/04/2010...
-
Page 2: Table Of Contents
Dear user, thank you for choosing our product. ICI Kronos comes from a non-stop research and state of the art technology. Genuine quality materials and components make our device a very reliable product. Our range of products follows all UNI, CEI and EN directives related to safety and electromagnetic compatibility (Directive 72/23/EEC relating to electrical equipment designed for use within certain voltage limits and Directive 89/336/CEE relating to electromagnetic compatibility). -
Page 3: Main Display
2.2. If Anti-frost mode is active, in the main screen will appear only Heating icon and not appear or the set temperature or the + and – ICI KRONOS Rev. 6 - 08/04/2010 FW 0.1... -
Page 4: Menu
Attention: Anti-frost temperature can be set to Off. In this case the function is not active. Flow and DHW temperatures can be modified according to the limits set in the board. ICI KRONOS Rev. 6 - 08/04/2010 FW 0.1 Pag.4... -
Page 5: Program
If you choose ON in the Holiday mode field, the temperature will be kept till the set time and date. Holiday ended, operation mode will return to that before the holidays. Press ESC to return to the previous display. ICI KRONOS Rev. 6 - 08/04/2010 FW 0.1... -
Page 6: Display Consumption
Slave unit are provided with an outdoor * Flow temp.: 50.2 ° C probe. * DHW temp:. 30.2 ° C * Only for stations with Clima board Press ESC to exit. ICI KRONOS Rev. 6 - 08/04/2010 FW 0.1 Pag.6... -
Page 7: Date And Time
Bus address Italiano No. of meters English Litres / Impulse Español Bus address: Values between 1 and 250 No. of meters: Values between 1 and 3 Litres/Impulse: Values of 1/10/100/1000 Litres/Impulse ICI KRONOS Rev. 6 - 08/04/2010 FW 0.1 Pag.7... -
Page 8: Mobile Phone Controls Via Sms
Slave unit via SMS. To use this function, the Slave must absolutely be connected to an ICI Kronos and to a Master provided with modem) Control syntax which can be sent via SMS: #SMS code “space”... -
Page 9: Connection (Only For Installers And Technical Service Centres)
3 CONNECTION (ONLY FOR INSTALLERS AND TECHNICAL SERVICE CENTRES) Communication between ICI Kronos and NEREIX metering station is provided by bus cable; the connection must be ensured with tripolar shielded cable (section of 3x0,35 mm ) up to 90 meters long. - Page 10 Metering boards are usually preset with a resistance and are fitted in a proper terminal box. Fitting of “Clima” boards must be carried out when wiring the ICI Kronos. Unstable communication between board and ICI Kronos can occur if no resistance is installed. CONNECTING ICI KRONOS TO NEREIX...
-
Page 11: Wall Mounting (Only For Installers And Technical Service Centres)
Insert the cabled terminal box and fix the device to its back cover. IMPORTANT: ICI Kronos is powered directly by the NEREIX multi-autonomous station board. During maintenance, the NEREIX board must be de-energised. In case of power outage, data are automatically saved by the device microprocessor. - Page 12 Appartenente al Gruppo Finluc, iscritto R.I. VR n. 02245640236 Via G. Pascoli, 38 - 37059 Zevio - fraz. Campagnola - VERONA - ITALIA Tel. 045/8738511 - Fax 045/8731148 info@icicaldaie.com - www.icicaldaie.com The data reported are indicative only and are not binding. Our company reserves the right to introduce alterations at any time as it deems fit and proper for the development of the product.