6.5. Right cover -extraction and installation-
6.5.1.
First drain off oil from engine and water from
radiator; remove connecting water pipes from
right cover and remove bolts from right cover.
6.5.2.
Remove the paper gasket and positioning
pin
6.5.3.
Check the crankshaft oil seal is intact
6.5.4.
Removal of right cover
6.5.4.1. Check the sealing ring of the water
pump cover is intact
6.5.4.2. Remove water pump cover to check if
seal ring of water pump cover is in good
condition.
UXPW 125 ENGINE SERVICE MANUAL AND EFI DIAGNOSTIC
- 56 -