Advertisement
CLEANING – NOTE: To maintain cleanliness and
increase service life, the hot dog steamer should be
cleaned daily.
Do not immerse the unit in water or any other liquid. If
liquid enters the electrical compartment it may cause
a short circuit or electrical shock.
1．Disconnect the power cord from the electrical outlet.
2．Allow the unit to cool down completely.
3．Remove any remaining hot dogs and buns.
4．Drain the water using the drain pipe located on the
operator side.
5．Detach all removable parts including the bun rack,
perforated trays, steam control lever, partition and glass panels.
Thoroughly clean the unit. Although stainless steel is corrosion
resistant, the unit should still be cleaned after every use.
SPECIFITION
Model No.
PA0099
PA0107
Using your hot dog steamer:
and turn the thermostat to max for quick steam. Preheating time
will be 15-45 minutes depends on the water volume and water
temperature. Using hot water is recommended for quick steam.
Temperature Control Knob:
controls the temperature inside the steamer from 86-176°F, turn
the thermostat knob to adjust for your desired temperature.
Voltage/Power
120V/1300W
120V/1300W
Product Size
18"x14"x16"
18"x14"19.3"
Push the power switch on
The thermostatic switch
Packing Size
21"x18"x17"
21"x18"x20.7"
Advertisement
