Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fumex FBE 1100 LG 0
Summary of Contents for Fumex FBE 1100 LG 0
- Page 1 Manual FBE 1100...
- Page 2 4.3.3 Change of configuration 4.3.4 Possible configurations 4.3.5 Mounting the fan 4.3.6 Installation 4.4 Accessory installation 4.4.1 Flexible Duct FBD 4.4.2 Transition FBO 1100 4.4.3 Mounting Rail FBM 1100 4.4.4 Vibration Damper Kit FBV © Fumex AB, 2021 Subject to change. Manual...
-
Page 3: Warranty
1 Introduction from FUMEX. This is also applicable to any spare parts used which do not correspond to the manufacturer’s specifications. 1.1 The manual... -
Page 4: Protective Equipment
FUMEX FBE 1100 2 Safety 2.3 General warnings & information 2.1 General The product must not be modified. The product is safe to use. It is designed in such a way that hazardous parts are only located in inaccessible The product must not be operated without areas. -
Page 5: Product Description
FUMEX FBE 1100 3 Product Description 3.1 Serial number & product name Refer to the product nameplate. 3.2 Labels and safety signs Safety signs that are missing or illegible must be replaced before the machine is used. Skellefteå, SWEDEN According to Fig. 1. -
Page 6: Areas Of Use
FUMEX FBE 1100 3.3 Areas of use 3.5 Function Radial fan FBE is intended for use in the evacuation of Air is sucked through the inlet cone (13, Fig. 2) to the gases, fumes and lighter particles. center of the fan wheel (12). The air is then sucked through the fan wheel and evacuated through the fan outlet (2). -
Page 7: Preparation For Use
4.3.1 Unpacking 1. Carefully unpack the product. 2. Check for any damage and missing parts. Contact a local Fumex representative directly if there is dama- ge or parts are missing. 3. Dispose of the packaging material according to local recycling regulations. -
Page 8: Change Of Configuration
LG 0 LG 90 LG 180 LG 270 When installing motor packages, apply liquid gasket for sealing between the motor plate and fan housing. Fumex recommends the HYLOMAR brand. Procedure Fig. 6 Upon modification of configuration, refer to Fig. 4 and Fig. -
Page 9: Installation
On roofs For optimal performance, Fumex recommend that the couplings are straight and at least 5 times the diameter At locations with heavy precipitation, founda- of the duct. -
Page 10: Accessory Installation
FUMEX FBE 1100 4.4 Accessory installation Accessories, ordered separately. Refer to Chapter 11 Accessories & Spare Parts. 13 mm x6 4.4.1 Flexible duct FBD 750 Ø498 Fig. 14 4.4.3 Mounting rail FBM 1100 Fig. 13 4.4.2 Transition FBO 1100 13 mm x4 2 x2 Fig. -
Page 11: Operation
FUMEX FBE 1100 5 Commissioning 4.4.4 Vibration damper Kit FBV 750 5.1 Start-up Any faults must be rectified before turning on the power. 1. Start the fan. If the machine’s overcurrent protection is tripped, power consumption is too high. Please contact Fumex. -
Page 12: Troubleshooting Guide
The recommended intervals are approximate and refer to the time after the first start-up. The product should be cleaned with clean cloths and neutral detergents to avoid damage. FUMEX recommends the following maintenance schedule: MAINTENANCE SCHEDULE Interval... - Page 13 The handling and correct removal of the various types of materials must be in accordance with the applicable legal requirements. Please contact FUMEX if you have any questions about the various types of waste. Manual...
-
Page 14: Technical Information
FUMEX FBE 1100 10 Technical information 4x Ø11 4x Ø11 Ø498 10.1 Technical data Weight: ..........132 kg Sound level : ............94 dB (A) * Voltage: ..........400/690 V 3~ Frequency: ......... 50 Hz Temperature limits Power: ..........11 kW Max. -
Page 15: Exploded View Drawing
FUMEX FBE 1100 10.2 Circuit diagram electronics -MA1 -MA1 10.3 Exploded-view drawing 11 10 Manual... -
Page 16: Accessories And Spare Parts
FUMEX FBE 1100 11 Accessories & Spare Parts Transition FBO 1100 Fig. 17 Transition from rectangular to round coupling. Mounting rail FBM 1100 For simple and safe installation. Fig. 18 Flexible duct FBD For connection to the suction side, including 2 moun- ting clamps. - Page 17 FUMEX FBE 1100 12 Notes Manual...
- Page 18 FUMEX FBE 1100 Manual...
- Page 19 FUMEX FBE 1100 Manual...
- Page 20 FUMEX SUPPLIES EXTRACTION ARMS · VEHICLE EXHAUST EXTRACTION · FANS · FILTERS · CONTROLS · WORKSHOP EQUIPMENT Verkstadsvägen 2, 93161 Skellefteå, Sweden • Tel.: +46 910-361 80 • Fax: +46 910-130 22 • E-mail: info@fumex.se www.fumex.com...
Need help?
Do you have a question about the FBE 1100 LG 0 and is the answer not in the manual?
Questions and answers