Name - Alesis MMT-8 Instruction Manual

12 NAME

The NAME button is used to change the name of a part or song. The name of a part or song is 14
characters long. An empty part or song will always have the name "EMPTY PART" or "EMPTY SONG", and
cannot be changed. When a part or song is first used, its name is changed from "EMPTY PART" or
"EMPTY SONG" to "NO PART NAME" or "NO SONG NAME". To change the name of a part or song, press
and hold the NAME button. The display will read:
The cursor is now under the first character of the part or song name. Using the +/- buttons, any
alphanumeric character can be selected, and the keypad can be used to enter numbers directly. The
page up and page down buttons are used to move the cursor left and right on the display. When the
desired name has been entered, pressing RECORD stores the name for that part or song. If RECORD is
not pressed before releasing the NAME button, any changes to the name will not be saved.
- Page 20 -