Download Print this page

EAW MKD Series Instructions Manual page 8

U-bracket
Hide thumbs Also See for MKD Series:

Advertisement

MKD1200 Series U-Bracket Mounting and Angle Lock Points
Mounting
Angle
Point
Lock
Point
"A"
1
2
3
4
5
6
"B"
1
2
3
7
8
"C"
3
8
b. Removing existing hardware
MKD800 U-Bracket
+/-12°
+/-8°
+/-25°, +/-55°, +/-75°, +/-105° +/-12°
+/-40°, +/-90°
+/-35°
+/-40°
+/-12.5°, +/-57.5°
+/-55°, +/-75°, +/-105°
+/-75°
Not Available with the WP Version
v. Test fit an MKD Series U-Bracket on an MKD Series Loudspeaker to confirm the
correct angle, loudspeaker and u-bracket orientation before installing the U-
bracket to the mounting surface.
i. MKD Series U-Brackets are mounted to MKD Series Loudspeakers using a button
head screw located at the center of the top and bottom of each loudspeaker.
ii. Using a 6mm Allen wrench, remove the flat head screws located at the center of
the top and bottom of the MKD Series Loudspeaker.
iii. If choosing to use the MKD Series U-Bracket angle lock points, locate the flat head
screw in the loudspeaker that corresponds with the intended install angle. Using
MKD1000 U-Bracket
MKD1200 U-Bracket
+/-6°
+/-40°, +/-90°
+/-32.5°, +/-47.5°, +/-82.5°, +/-97.5°
+/-25°, +/-55°, +/-75°, +/-105°
+/-40°, +/-90°
+/-49°, +/-81°, +/-99°
+/-22°, +/-58°, +/-72°, +/-108°
+/-13.5°
+/-70°

Advertisement

loading

This manual is also suitable for:

Mkd800Mkd1000Mkd1200