Arduino GY-NEO6MV2 Manual

Arduino GY-NEO6MV2 GPS Module c/w Antenna & Flight Control EEPROM
GY-NEO6MV2 board features the u-blox NEO-6M GPS module with antenna and built-in
EEPROM. This is compatible with various flight controller boards designed to work with a
GPS module.

Technical Specifications:


Power Supply Range: 3 V to 5 V

Model: GY-GPS6MV2

Ceramic antenna

EEPROM for saving the configuration data when powered off

Backup battery

LED signal indicator

Mounting Hole Diameter: 3 mm

Default Baud Rate: 9600 bps

Module size 23mm * 30mm

Antenna size 12 * 12mm

Cable:20mm

Features:

 Use XM37-1612 module, MTK Platform, with high-gain active antenna
 TTL level, compatible with 3.3V/5V system
 The default baud rate: 9600
 With rechargeable backup battery, can save the ephemeris data when it power down,
and make the warm start.
 Suitable for RC quad copter, navigator
_____________________________________________________________________________________
For purchase & enquiries, please contact sales@synacorp.com.my or call 04-5041617