1: Connections; Unpacking And Inspection; Analog Connections; Inputs - Alesis AI-3 Reference Manual

C

Unpacking and Inspection

Your AI-3 was carefully packed at the factory, and the shipping carton was designed
to protect the unit during shipping. Please retain this container in the unlikely event
that you need to return the AI-3 for servicing.
The shipping carton should contain the following items:
• This instruction manual
• Alesis AI-3 with the same serial number as shown on shipping carton
• AC Power cable
• Alesis warranty card
It is important to register your purchase; if you have not already filled out your warranty
card and mailed it back to Alesis, please take the time to do so now.

Analog Connections

The AI-3 has eight analog inputs and outputs. These are designed for line level (not
mic level) signals, such as those from a mixing console or recorder.
• Inputs. There are eight balanced or unbalanced 1/4" analog inputs. These send
audio to the corresponding channel of the ADAT Optical Digital Output. (This is
true only if the front panel "Optical Out Source" switch is set to "Analog In", see
Chapter 2, "Front Panel Controls" for details.)
• Outputs. There are eight balanced or unbalanced 1/4" analog outputs. These
convert the ADAT Optical Digital Input signal to an analog signal suitable for
use with analog mixers and monitors. Unlike the Analog Inputs, the Analog
Outputs are always active.
AI-3 Reference Manual
C
HAPTER
ONNECTIONS
Connections – Chapter 1
1
11