Introduction Introduction 1.3 Limitation of liability All information and notes in these operating instructions You have made a good choice by purchasing the HOLZ- were summarised while taking applicable standards and KAFT air extraction unit. rules, the state-of-the-art technology and our long-term knowledge and experiences into consideration.
Safety CAUTION! Eye protection This combination of symbol and signal words indi- Protective glasses protect the eyes against projected cates a potentially dangerous situation which may parts and splashes of liquid. lead to slight or minor injury if not avoided. Protective gloves ATTENTION! The protective gloves serve to protect the hands...
Intended Use 2.5 General safety rules 15. Protect the device against moisture. If the machine is operated outdoors, use only extension cords desi- gned and labeled for outdoor use. 16. Do not operate in potentially explosive atmospheres. WARNING! 17. Use only original accessories. When using a power tool, basic safety precautions 18.
Transport, packing, storage Transport, packing, storage Proper use also includes compliance with all information in this manual. Any use beyond the intended use or otherwise is considered misuse. For structural and tech- 4.1 Delivery and Transport nical changes to the extraction system, the company Delivery Stürmer Maschinen GmbH assumes no liability.
Technical Data Devices may only be transported by authorized and qua- Type ASA 1901 ASA 1903 lified persons. Act responsibly during transport and al- ways consider the consequences. Refrain from daring Negative pres- 1700 Pa 1700 Pa sure max. and risky actions. Gradients and descents (e.g.
Description of the device Description of the device Type ASA 7703 Illustrations in these operating instructions may dif- fer from the original. Length 1900 mm Air Extraction Unit ASA 1901 and ASA 1903 Width / Depth 670 mm Height 2800 mm Weight 88 kg Motor input...
Assembly Assembly Air Extraction Unit ASA 7703 WARNING! Installation, electrical connection, supply connection, maintenance, commissioning, repair, etc. may only be carried out by trained specialist personnel. ATTENTION! Risk of injury! Despite optimized manufacturing processes, there is a residual risk of injury from cutting edges. Wearing safety gloves! Wear safety shoes! Wear protective clothing!
Operation 7.2 Electrical connection DANGER! DANGER! - If the direction of rotation is wrong, there is a risk of Danger of electrocution! overloading the motor. Contact with live components may cause mortal dan- - The current consumption must not exceed the spe- ger.
Care, maintenance and repair Care, maintenance and repair Disposal of collected goods Wear breathing protection! Maintenance (Filter mask with particle filter; fil- ter class 2) DANGER! When the filling container is full or when the maximum - After switching off the device, the impeller continues permitted level is reached: to run for approx.
Care, maintenance and repair Step 3: Position the open end of the filter bag over the Monthly: upper lip of the support drum. Pass the locking strap through the filter bag and secure it with the clamp. ATTENTION! Step 4: Pass the remaining fastener tape through the lo- Monthly and annual inspections must be documented ops of the dust collection bag.
Emergency 12.2Waste disposal of electric equip- ment DANGER! All protective and safety equipment must be reinstal- Please note that electrical devices contain a variety of re- led immediately after repair and maintenance work cyclable materials as well as environmentally harmful has been completed.
Spare parts 13 Spare parts Example The engine for the Air Extraction Unit ASA 1901 must be ordered. The engine has the number 2 in the spare parts DANGER! drawing 1. Danger of injury by the use of By ordering spare parts, send a copy of the spare parts wrong spare parts! drawing (1) with the marked part (engine) and marked Dangers may result for the user and damages as well...
Spare parts 13.2 Spare parts drawings The following drawings should help in case of service to identify necessary spare parts. To order, send a copy of the part drawing with the parts marked to your authorized dealer. 13.2.1Spare parts drawing ASA 1901 and ASA 1903 Fig.
Page 16
Spare parts 13.2.2Spare parts drawing ASA 2803 Fig. 9: Spare parts drawing ASA 2803 ASA-Series | Version1.05...
Page 17
Spare parts 13.2.3Spare parts drawing ASA 4303 Fig. 10: Spare parts drawing ASA 4303 ASA-Series | Version1.05...
Page 18
Spare parts 13.2.4Spare parts drawing ASA 7703 Fig. 11: Spare parts drawing ASA 7703 ASA-Series | Version1.05...
As per machine directive 2006/42/EC, Appendix II 1.A Manufacturer / Distributor: Stürmer-Maschinen GmbH Dr.-Robert-Pfleger-Str. 26 D-96103 Hallstadt herebly declares that the following product Product group: Holzkraft® Woodworking machines Designation of the machine *: ASA 1901 Item number *: 5128191 ASA 1903 5128193...
Need help?
Do you have a question about the ASA Series and is the answer not in the manual?
Questions and answers