Chapter 5: Using The Control Panel; Working With The Io14/26 Control Panel; Accessing The Control Panel; Select The Alesis Io - Alesis iO14 Reference Manual

Using the Control Panel
5

Working with the IO14/26 control panel

Accessing the control panel

In Windows, open the control panel from the shortcut on your
desktop, the Programs menu, or from within your audio
application.
On the Mac, access this panel from the "configure device" button
of Audio/MIDI Setup.

1. Select the Alesis IO.

Be sure that your IO14/26 is shown here. If it is not shown, then
your computer does not "see" it. Check the IO's connections to
your computer.
2. Create a nickname for your IO|14/26
(optional)
You can change the name of the IO|14/26 as it's seen by the
recording program.
Once this is done, choose "Reset All" in Cubase (or the equivalent
command in other programs) to update the display of the device
and channel names.
To open the control panel
from within Cubase in
Windows, select "Devices" |
"Device Setup...." | "VST
MultiTrack." Then, click the
"Control Panel" button.
Creating a nickname for your
device is entirely optional.
31