Table of Contents
Advertisement
Quick Links
WE MOVE YOU
Armeo
Power
®
QUICK REFERENCE
GUIDE
1. POSITION OF DEVICE
•
Before setting up the patient in the
device, make sure you are on the
"Device Settings" screen
•
Unlock the 4 brakes of the base
•
Move the ArmeoPower to align the
pin on top of the acromion
•
Lock the 4 brakes of the base
2. HEIGHT ADJUSTMENT
•
Align the reference line on the robotic
shoulder module with the head of the
humerus.
•
Use the remote control to move the
column up or down
3. PLACEMENT OF THE
PATIENT'S ARM
•
Loosen the knob of the hand module
to ensure enough space for the wrist
•
Place the arm inside the orthosis
•
Gently secure the straps, without
tightening
Advertisement
Table of Contents
Summary of Contents for DIH Hocoma Armeo Power
- Page 1 WE MOVE YOU Armeo Power ® QUICK REFERENCE GUIDE 1. POSITION OF DEVICE • Before setting up the patient in the device, make sure you are on the “Device Settings” screen • Unlock the 4 brakes of the base • Move the ArmeoPower to align the pin on top of the acromion •...
- Page 2 4. ADJUSTMENT OF THE UPPER ARM LENGTH • Adjust the length using the hex key • Align the patient’s elbow joint with the orthosis rotational axis 5. ADJUSTMENT OF THE FOREARM LENGTH • Adjust the length using the hex key •...
- Page 3 6.A POSITION OF THE MANOVOPOWER (IF AVAILABLE) • Position the ManovoPower in a way that the fingers and thumb can fit comfortably in the straps (see 4., second picture) • Secure the fingers by hooking the metal loops over the rubber catch •...
- Page 4 8. INSERT DATA IN THE SOFTWARE • Insert the upper arm and forearm length in the software The segment lengths and the height and weight of the patient in the Patient Setup screen will influence the amount of arm weight support applied to the orthosis.
Need help?
Do you have a question about the Hocoma Armeo Power and is the answer not in the manual?
Questions and answers