Before Operating; Temperature Control And Adjustment - Beko NDU 9950 Instructions For Use Manual

GB

Before operating

Final Check
Before you start using the appliance check
that:
1. The feet have been adjusted for perfect
levelling.
2. The interior is dry and air can circulate freely
at the rear.
3. The interior is clean as recommended under
"Cleaning and care."
4. The plug has been inserted into the wall
socket and the electricity is switched on. When
the door is open the interior light will come on.
And note that:
5. You will hear a noise as the compressor
starts up. The liquid and gases sealed within
the refrigeration system may also make some
(noise), whether the compressor is running or
not. This is quite normal.
6. Slight undulation of the top of the cabinet
is quite normal due to the manufacturing
process used; it is not a defect.
7. We recommend leaving the temperature
setting at the factory value (e. g. -18/+4) and
monitor the temperature to ensure the
appliance maintains desired storage
temperatures (See section Temperature Control
and Adjustment).
8. Do not load the appliance immediately it is
switched on. Wait until the correct storage
temperature has been reached. We
recommend checking the temperature with an
accurate thermometer (see; Temperature
Control and Adjustment).
Instructions for use
Temperature control and
adjustment
Operating the refrigerator
When you first turn on the appliance, the
refrigerating -compartment indicator will show
a temperature of +4 °C, while the freezer-
compartment indicator shows the temperature
as set at dispatch from the factory; -18 °C
(Fig. 2 - 2 and Fig. 2 - 5 ).The compressor
will begin to function approximately 1 minutes
after the appliance is plugged in. After the
compressor has begun functioning, the
temperatures of the various compartments will
reach their respective settings within 24 hours,
depending on the ambient temperature and
the degree to which the refrigerator is loaded.
You can monitor the cooling from the
refrigerating and freezer compartment
temperature indicator.
Important !
•When the temperatures of the freezer and
refrigeration compartments are adjusted to
maximum, food stored in zero temperature
compartment .
4