Perfect Descent 230 Series Operation Manual
  1. Manuals
  2. Brands
  3. Perfect Descent Manuals
  4. Sports & Outdoors
  5. 230 Series
  6. Operation manual

Perfect Descent 230 Series Operation Manual

Speed drive & direct drive climbing system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operations Manual for the
230 Series
Speed Drive
Direct Drive
0123 EN 341:2011-1A
EN 360:2002, RFU PPE-R/11.128 V1
ALWAYS READ INSTRUCTIONS BEFORE USE
THIS OPERATIONS MANUAL MUST REMAIN WITH THE PERFECT DESCENT AT
ALL TIMES AND MUST ONLY BE REMOVED BY THE END USER. THIS MANUAL
CONTAINS INFORMATION ABOUT THE SAFE USE OF THE PERFECT DESCENT
CLIMBING SYSTEM AS WELL AS REGISTRATION AND WARRANTY INFORMATION.
ENSURE THAT IT IS READILY AVAILABLE TO OPERATORS AT ALL TIMES.
SERIAL#:

Advertisement

Table of Contents
loading

Summary of Contents for Perfect Descent 230 Series

  • Page 1 EN 360:2002, RFU PPE-R/11.128 V1 ALWAYS READ INSTRUCTIONS BEFORE USE THIS OPERATIONS MANUAL MUST REMAIN WITH THE PERFECT DESCENT AT ALL TIMES AND MUST ONLY BE REMOVED BY THE END USER. THIS MANUAL CONTAINS INFORMATION ABOUT THE SAFE USE OF THE PERFECT DESCENT CLIMBING SYSTEM AS WELL AS REGISTRATION AND WARRANTY INFORMATION.
  • Page 2 Facilities using the Perfect Descent Climbing System should refer to, and abide by the Climbing Wall Association Operations Standards which provides guidelines for the indoor climbing industry, including age restriction, waiver forms, belay checks and climbing facility operating procedures. Also refer to and abide by the Climbing Wall Association’s Engineering Standards, the climbing industry standard for...
  • Page 3 Owners and operators must have devised an emergency rescue plan for any climber in distress at all sites operating the Perfect Descent Climbing Systems. Operators must inform users of the Perfect Descent of the procedure for rescuing a climber in distress prior to climbing. HEALTH AND SAFETY...

  • Page 4: Table Of Contents

    5.1 - USER INSTRUCTION ..................... 14 6.0 - USAGE LIMITATIONS ....................15 7.0 - HARNESSES ......................15 8.0 - SUPERVISION DURING USE ..................15 9.0 - PROPER DESCENDING METHOD ................16 Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...
  • Page 5 14.4 - HOW TO OBTAIN FACTORY SERVICE..............32 14.5 - SERVICE AND INSPECTION LOGS ..............32 14.6 - FACTORY SERVICE LOG ................. 33-34 WARRANTY INFORMATION ..................35 Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 6: Certification

    CERTIFICATION • If the Perfect Descent is resold outside of the country of destination, the reseller must provide instructions for use, service, maintenance and repair in the language of the country of use. • The Perfect Descent can be used as a climbing system device only in combination with other components.

  • Page 7: Description Of Perfect Descent Climbing System

    1.0 DESCRIPTION OF PERFECT DESCENT CLIMBING SYSTEM The Perfect Descent Climbing System is a controlled descent device for recreational climbing, and is used in indoor climbing gyms, on portable climbing walls, or on challenge courses. It is installed where a top-rope would be, thus eliminating the need for a belayer by providing a hands-free belay for the climber.

  • Page 8: Perfect Descent Climbing System Model 220 Specifications

    Line: minimum breaking strength 15.6kN (3,500lbs) o Internal parts: stainless steel and/or aluminum • Case Dimensions: 40x24x19 cm (16x9.5x7.5 in) • Net Weight: 13.1-14kg (29-31lbs) Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 9: Unpacking The Perfect Descent Climbing System

    3.0 UNPACKING THE PERFECT DESCENT CLIMBING SYSTEM PRIOR CONSIDERATIONS • Ensure that this operations manual is readily available to Perfect Descent users at all times. It contains information relating to the safe use of the Perfect Descent Climbing System and includes all product registration and warranty information.

  • Page 10: Moisture

    4.1.2 MOISTURE 4.1.2.2 Outdoor Use • The braking mechanism of the Perfect Descent Model 230 is sealed for use in an outdoor environment; however, if moisture is allowed to remain in contact with the other components, the useful life of the Perfect Descent Climbing System may be reduced. The Perfect Descent Climbing System has one opening where water can enter the internal mechanism: the nozzle.

  • Page 11: Handling

    4.1.4 HANDLING • Take care when lifting the Perfect Descent Climbing System as it is a heavy item: ≈13.6 kg (30lbs). • Take precautions to avoid dropping the Perfect Descent Climbing System when it has been detached from the climbing wall.

  • Page 12: Mounting Points And Orientation

    4.2.1 MOUNTING POINTS AND ORIENTATION • The Perfect Descent auto belay must only be mounted using the attachment points at the top of the device. The device must be mounted upright using one of the two methods shown in the illustration below.

  • Page 13: Installation Carabiner

    Self-Retracting Descender exceeds the scope of this document. All design and installation parameters must be approved by a qualified engineer. Do not install Perfect Descent devices or use in a manner that produces repetitive shocking loads to the unit. Shocking loads are created when weight is applied to the lanyard with slack present.

  • Page 14: Training

    5.1 USER INSTRUCTION • Prior to clipping in, all climbers must be instructed in the safe use of the Perfect Descent. Operators are to ensure that all climbers are familiar with the site rescue plan in the event the climber becomes distressed.

  • Page 15: Usage Limitations

    6.0 USAGE LIMITATIONS • The Perfect Descent Climbing System is designed for use by one person at a time. The designed weight range is between 11.5kg and 140kg (25lbs and 310lbs). Persons with muscular, skeletal, or other physical disorders should consult a physician before using the Perfect Descent Climbing System.

  • Page 16: Proper Descending Method

    • If a climber is anxious or unfamiliar with the function of the Perfect Descent Climbing System, it is recommended that the climber ascend a short distance and descend in order to become acquainted with the device.

  • Page 17: Carabiner Operation

    10.0 CARABINER OPERATION • The carabiner(s) provided with Perfect Descent Climbing System is either a two stage or three stage self-closing and self-locking carabiner. • When attaching the carabiner(s) to a harness, verify that the harness webbing or clothing is not obstructing closure of the gate.

  • Page 18: Care, Maintenance And Storage

    11.1 REPLACING THE LINE (AND CARABINER) • The Perfect Descent Climbing System comes equipped with a line that may be replaced in the field by the owner/operator. A line must be replaced immediately if it appears damaged, excessively fuzzy, worn, sun bleached, if the wear indicators have began to fray, if there is corrosion on the carabiner or if the carabiner fails to operate properly.

  • Page 19: Maintenance And Service

    • Never allow the Perfect Descent Climbing System to rest for lengthy periods of time on concrete or ash floors as the lime sulfur and ash can cause corrosion. Store the device with the lifeline fully retracted.

  • Page 20: Labels And Markings

    12.0 LABELS AND MARKINGS • The following labels must be present, legible and securely attached to the Perfect Descent Climbing System. If not, remove the Perfect Descent Climbing System from use and mark it as “UNUSABLE” until a Formal Inspection is performed.
  • Page 21 Due date of next Factory MONTH: 1 2 3 4 5 6 7 8 9 10 11 12 YEAR: 2019 2020 2021 2022 2023 2024 Service/Periodic Examination Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...
  • Page 22 UIAA 105 EN 361 Harness standard Descent Rate requirements Connect to harness per manufacturer User Weight instruction making sure the carabiner gate is fully closed and locked Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...
  • Page 23 Avoid swing falls Do Not allow the line and obstacles. to pass over obstacles and edges. Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 24: Perfect Descent Climbing System Inspection

    13.0 PERFECT DESCENT CLIMBING SYSTEM INSPECTION 13.1 DAILY INSPECTION The Perfect Descent Climbing System must be inspected before each use to verify that the unit is functioning properly. • Verify smooth, even deployment of the line by pulling the line out until it stops. Return the line back into the housing in a controlled manner.

  • Page 25: Control Of Equipment

    13.3.3.1 DIAGRAM • This is a drawing (See section 13.4) of the Perfect Descent Climbing System with numbers corresponding to those on the Formal Inspection Log in the column titled “Inspection Number.” 13.3.3.2 FORMAL INSPECTION LOG •...

  • Page 26: Formal Inspection Checklist

    • Step 7: Fill in the Inspector’s Name, Inspection Date and Overall Condition Pass/Fail. • Step 8: If it has been determined that the Perfect Descent Climbing System is not acceptable for use, contact C3 Manufacturing to determine if service is required, or if the unit needs to be retired.

  • Page 27: Formal Inspection Diagram

    13.4 FORMAL INSPECTION DIAGRAM I-XXXX Serial number Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 28: Formal Inspection Checklist

    ™ Any Other Visible Issues ™ Cut/Broken ™ Wear Damage ™ Missing/Loose Handle ™ Burns/Heat Exposure ™ Chemical Exposure ™ Cracked/Split ™ Any Other Visible Issues Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 29: Formal Inspection Log

    Brake Drum Nozzle Nozzle Pin Labels Handle Installation Handle Function Tests Line Function Test Retraction Function Test Carabiner Function Test Inspector’s Name Inspection Date Overall Condition Pass/Fail Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 30: Lanyard Wear Examples

    The Wear Table is not all inclusive; DO NOT use any lanyard that has been damaged or compromised. Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 31: Factory Recertification

    14.2 OWNER REGISTRATION • When the Perfect Descent Climbing System is purchased, the first thing the owner and operator must do is read this Operations Manual and register their device. Each unit has a unique serial number which identifies all information associated with the unit. The serial number enables C3 Manufacturing LLC to identify when the product was made;...

  • Page 32: How To Obtain Factory Service

    Operations Manual with the unit to the owner. 14.5 SERVICE AND INSPECTION LOGS • It is a requirement of section 13.3 that the Perfect Descent Climbing System be formally inspected at least every six months. C3 Manufacturing LLC requires that the device receive factory recertification at intervals no longer than twelve(12) months.

  • Page 33: Factory Service Log

    Report is a detailed report of annual factory recertification retained permanently by C3 Manufacturing LLC or the Authorized Service Center. It is available for examination upon request. Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...
  • Page 34 Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...

  • Page 35: Warranty Information

    For additional information, please contact C3 Manufacturing LLC at 303-953-0874 or info@perfectdescent.com. Copyright © 2020, C3 Manufacturing - 230 Series-Speed Drive-Direct Drive REV 09/2020 PN 100125...
  • Page 36 Contact us for further information: 3809 Norwood Drive Unit #4 Littleton, CO 80125 Phone: 303-953-0874 Fax: 303-862-8442 • • • • Info@PerfectDescent.com www.PerfectDescent.com • Perfect Descent™ and Perfect Descent Climbing Systems™ are divisions of C3 Manufacturing LLC...

Table of Contents