3. Set the old parts aside
Set the old and unused parts aside. When you finish rebuilding the carburetor you can throw these parts
away.
Reassembling the Carburetor
To finish rebuilding your carburetor, all you have to do is reassemble it. Since you've replaced the rows of old parts
with new ones, you can simply begin putting the carburetor back together to finish the rebuild.
1. Install the new filter screen
The filter screen is a delicate part, so use caution when installing it. You can use a small Allen wrench
to press the filter into place, but be careful not to crease or tear it.
2. Replace the top cover assembly
Add the new gasket to the top cover.
Norton is a registered trademark of Saint-Gobain Abrasives Inc. www.nortonconstructionproducts.com
PH: (254) 2310918