La Hacienda Mega Chimenea User Instructions

Table of Contents

Download this manual

Mega Chimenea

User Instructions - Please keep for future reference

Tools required (not included)

Tools list

IMPORTANT! – Carefully remove any packaging before use, but retain the safety instructions.

These instructions form part of the product.

Please take note of all of the safety warnings listed in these instructions.

Please read these instructions in their entirety and retain them for future reference.

These instructions should be stored with the product.

This product is for domestic use ONLY and should not be used commercially or for contract purposes.

Failure to adhere to these instructions could result in property damage, personal injury or death.

Produced in PRC for La Hacienda Ltd

Hangar 27, Site C, Aston Down Airfield, Nr Stroud, Glos, GL6 8HR, UK

www.lahacienda.co.uk

56309

V2.0

Table of Contents

Need help?

Do you have a question about the Mega Chimenea and is the answer not in the manual?

Page 1 This product is for domestic use ONLY and should not be used commercially or for contract purposes. Failure to adhere to these instructions could result in property damage, personal injury or death. Produced in PRC for La Hacienda Ltd Hangar 27, Site C, Aston Down Airfield, Nr Stroud, Glos, GL6 8HR, UK...
Page 2 To extinguish, stop adding fuel and allow fire to die or douse with sand. DO NOT use water as this may damage the product. STORAGE • Remove loose paint and rust with a wire brush when needed and re-paint the product using La Hacienda High Temperature Paint.
Page 3 Parts list 1 (1x) 5 (1x) 8 (1x) A (3x) 2 (1x) 9 (1x) B (3x) 10 (3x) C (2x) 6 (1x) 11 (1x) D (2x) 3 (1x) E (2x) 7 (1x) 4 (1x) F (2x) Prior to assembly, read the instructions carefully. Check all parts against the parts list. Carry out assembly on a soft surface to avoid scratching the paint.
Page 4 Assembly Instructions IMPORTANT! - Remove any packaging before use, but retain the safety instructions and store them with this product. ASSEMBLY DUE TO THE WEIGHT AND SIZE OF THIS PRODUCT IT REQUIRES AT LEAST 2 PEOPLE TO ASSEMBLE. STEP 1 - Remove the washers and nuts from the bolts in the legs (10) using an 5mm allen key if needed. Attach 3x legs (10) to main body and secure with the washers and nuts.

56309