W 180 x D 85 x H 70 mm Weight: 0.55 kg Properties This holder facilitates the installation and dismantling of the infrared heater W3000 E, code-no.: 825214 to the square tube or round tube. This guarantees flexible use as required. Equipment included Unpack the holder and dispose of all packaging material.
Important tips Do not mount the heater holder in the vicinity of flammable, explosive materials. Do not mount the holder directly to a wall or ceiling but on a suitable square or round tube which is away from the wall or ceiling at a distance of at least 10 cm.
Installation Step 1 Mount the holder U profile (2) onto device 825214 using the supplied bolts M6x12 (1) and nuts M6 (3). Infrared heater Step 2 Next, mount the heater (2) on a suitable square or round tube with the supplied bolts M6x50 (5).
Page 5
M6 (3). When not used for a longer time, store the heater and holder in a dry and clean place, away from frost and sunlight, out of reach of children. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax:...