Page 1
OWNER/OPERATOR’S MANUAL & ILLUSTRATED PARTS LIST MODELS: 75-70625 SLIP SCOOP 44” SS244 75-70630 SLIP SCOOP 48” SS248 WARNING: If incorrectly used this machine can cause severe injury. Those who use and maintain this machine should be trained in its proper use, warned of its dangers and should read the entire manual before attempting to set up, operate, adjust or service the machine.
Page 2
CALIFORNIA WARNING Proposition 65 Warning The engine exhaust from this product Diesel engine exhaust and some of contains chemicals known to the State its constituents are known to the State of California to cause cancer, birth of California to cause cancer, birth defects or other reproductive harm.
SLIP SCOOP IMPORTANT MESSAGE Thank you for purchasing this Jacobsen product. You have purchased a world class product, one of the best designed and built anywhere. This product comes with an Owner/Operator's Manual / Illustrated Parts List. The useful life and good service you receive from this product depends to a large extent on how well you read and understand this manual.
INTRODUCTION/SPECIFICATIONS SLIP SCOOP DESCRIPTION The Slip Scoop attachment mounts on the quick hitch front lift of the power unit. On or off in a minute or less, it is a quick, inexpensive way to relocate loose materials. Use it for landscaping, light excavating and many tasks where you would normally use a wheelbarrow.
SAFETY SLIP SCOOP This symbol means: NOTICE !!! ATTENTION! Unauthorized modifications may present extreme BECOME ALERT! safety hazards to operators and bystanders and could also result in product damage. Your safety and the safety of others is involved. Jacobsen, a Textron Company strongly warns Signal word definitions against, rejects and disclaims any modifications, add-on accessories or product alterations that are...
Page 6
SAFETY SLIP SCOOP GENERAL SAFETY 1. Read and understand the Owner’s Manual before attempting to operate this machine. 2. Operate all controls from the operator’s seat. NO RIDERS. 3. Keep all shields in place and safety switches adjusted properly. 4. Do not leave equipment unattended. STOP the engine and remove the key. 5.
ASSEMBLY INSTRUCTIONS SLIP SCOOP Refer to Pages 8 & 9 for Parts Identification Assembly Instructions 75-70625 Assembly Instructions 75-70630 1. Unfasten the bucket (Fig. 1, Item 16) and the 1. Unfasten the bucket (Fig. 1, Item 16) and the sub-frame (Fig. 1, Item 15) from the sides of the sub-frame (Fig.
INSTALLATION/OPERATION SLIP SCOOP HYDRAULIC SLIP SCOOP INSTALLATION 1. Attach the slip scoop to the front lift. 2. Attach the hydraulic hoses to the auxillary couplers. Route the hoses in a place where they will not be damaged. If the hydraulic lever movement seems backward, reverse the hoses at the quick couplers.. HYDRAULIC SLIP SCOOP OPERATION 1.
HOSE-1/4 (USED ON 48" ONLY) (USED ON 48" ONLY) 4116761 DECAL-MADE IN THE USA 1-11 64025-29 NUT-HEX #8-32 KEPS 4128363 DECAL-STEINER (USE QTY 3 ON 44") *NOT ILLUSTRATED (USE QTY 4 ON 48") 1-12 64163-73 WASHER 1-13 4134161 CLAMP-HOSE RETAINER (USE QTY 3 ON 44")
Page 12
ISO 9001 and ISO 14001 registration at all our manufacturing locations. A worldwide dealer network and factory-trained technicians backed by Textron Parts Xpress provide reliable, high-quality product support. BOB-CAT BROUWER BUNTON CUSHMAN RYAN STEINER...
Need help?
Do you have a question about the SS244 and is the answer not in the manual?
Questions and answers