Camco T10208 Installation And Operating Instructions

T10208 Electric Anchor Winch
INSTALLATION AND OPERATING INSTRUCTIONS
This anchor winch, intended for Fresh Water use, retrieves and deploys river and mushroom anchors using anchor
rope. It features power-up, power-down, and AutoDeploy operation from a switch that is located on the winch cover
and from a wireless remote controller, which can be installed near the boat's helm.
If you have any questions or difficulty
installing this product, we are here to help!
First READ THIS MANUAL.
If you still need help, call us
from 8 am - 5 pm (EST) Monday – Friday.
800-334-2004
Note: At this time, we provide Phone Support in English only.

TRAC Anchor Winch Limited Warranty

LIMITED WARRANTY: Camco warrants this product to be free from defects in material and workmanship under normal use and service conditions for 12 months from the date of first purchase.
Camco' s liability is limited solely to the replacement of any defective product returned to us. To the extent allowable by law, Camco makes no other warranty, either expressed or implied, nor assumes
any liability for incidental or consequential damages resulting from the use of this product or for breach of warranty of merchantability or fitness for a particular purpose. Submit warranty claims to
Camco Manufacturing, 121 Landmark Drive, Greensboro, NC 27409.
GENERAL SAFETY INFORMATION - Throughout this manual potential safety hazards will be noted with the following terms. Please read and understand these terms
before operating the product.
DANGER
Danger means a hazard that WILL cause death or
serious injury if the warning is ignored.
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain
this anchor winch. Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage! Retain instructions for future reference.
CAUTION
NOT use the anchor winch to pull the boat to the anchor position. Motor the boat toward the anchor while retrieving the anchor rope.
DANGER
trailering, it could cause serious damage and/or injury. Attach Safety Cable Snap-Hook around anchor shackle to secure the anchor when boat is underway.
895237 69004 Angler 30 G3 instructions.indd 1 895237 69004 Angler 30 G3 instructions.indd 1
WARNING
Warning means a hazard that COULD cause death or
serious injury if the warning is ignored.
Always raise the anchor before moving the boat. Do NOT drag the anchor with the boat's power. This will cause product damage or injury. Do
- When the boat is being trailered, the anchor must be placed in the boat and secured. If the anchor breaks free during

SAFETY CABLE USE

CAUTION
Caution means a hazard that
injury if warning is ignored. It may also mean hazard that will
only cause property damage.
895237
Item Name: TRAC Pontoon 35-G3 Anchor Winch Instructions
New RM#: 895237
Old RM#: n/a
Colors: 1/1 black
Coating: none
Size: 8 pg booklet. 8.5 x 11 folded size - saddle stitch
Stock: 60 lb bond
Notes:
Date Released: #820
cause minor or moderate
MAY
#820
8/24/20 11:00 AM 8/24/20 11:00 AM
Perforated Line
Glue Area