Advertisement
Advertisement
Table of Contents
Summary of Contents for Lippert Components Siphon 360
- Page 1 360 Siphon OEM INSTALLATION MANUAL ® Rev: 07.11.2018...
- Page 2 TABLE OF CONTENTS Introduction Preparation Resources Required Installation Requirements Installation Introduction The 360 Siphon® RV holding tank vent cap removes odors from the source. Odors are exhausted through the roof vent before they have a chance to invade the RV living space. By design, the 360 Siphon® can only create an updraft, expelling odors and fostering an oxygen-rich environment to speed up waste breakdown.
- Page 3 Installation Dry fit the vent cap on the roof vent prior to adding adhesive to the 360 Siphon® (Fig. 1). If using the water funnel (Fig. 2), snap it in place into the underside of the 360 Siphon®. NOTE: The funnel channels excess moisture into the holding tanks. The funnel aids in protecting the roof surface from moisture and helps ensure a tight seal if the pipe is not cut straight.
- Page 4 The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (“LCI”). LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an authorized LCI representative has been provided. Any unauthorized use shall void any applicable warranty. ...
Need help?
Do you have a question about the Siphon 360 and is the answer not in the manual?
Questions and answers