Advertisement
Quick Links
Advertisement
Summary of Contents for B+G E Tech DRT-430A
- Page 1 DRT-430A series User Manual DRT-430A Three phase four wires DIN rail energy meter LCD display (Four modules – MID certificated) Foreword General Technical Data Basic errors Dimension Installation Operating Technical support User manual...
-
Page 2: General Technical Data
B+G product range we have provided a large scale of energy meters on the market suitable for 110V AC to 400V AC (50 or 60Hz). Although we produce the B+G DRT-430A series meter according to EN50470-3 and our strict quality inspection, there might be possibilities that our product shows a fault or failure for which we do apologize. -
Page 3: Basic Errors
DRT-430A series User Manual 1.2.9 Humidity Operating Storing The meter is intended for Non-Condensing humidity. 1.2.10 Protection Protection against penetration Of dust and water IP51 The meter is intended for Indoor Use 1.2.11 insulating encased meter Of Protective class 1.2.12 Voltage withstand... - Page 4 DRT-430A series User Manual 1.4 Dimension Height 110 mm Width 70 mm Depth 64.5 mm Weight 0.4 kg (net) Material Front panel PC inflammable retarding Cover ABS inflammable retarding Base ABS inflammable retarding...
-
Page 5: Installation
DRT-430A series User Manual 1.5 Installation CAUTION Turn off all the power before working on it. Always use a properly rated voltage sensing device to confirm that power is off. WARNING Installation should be performed by qualified personnel familiar with related procedures and regulations. - Page 6 The more quickly LED flash, the more consumption there is. Reading the meter: The display digit of DRT-430A is 6+1. Six integers are marked with white color and one decimal is marked with red. Display function：It will display the total kWh consumed.
-
Page 7: Technical Supports
DRT-430A series User Manual Technical supports Problem Check Solution No light for Is there current ? Only when there has current, this LED will flash. consumption Maybe there is a fault in the inside indicator. circuit. Please contact your technical supporter to replace this meter.