RUSTA 751511750101 Manual page 5

ASSEMBLY INSTRUCTIONS
1. Screw the inlet (8) and pump (1)
together by turning clockwise.
Check that the connection is tight
to avoid leakage.
USE
NOTE! Fully charge the product before using it for the first time • Do not leave the product unattended
while it is running • Always remove the product from the water and turn it off when not in use • Always
check that the product is intact before using it.
1. To start, press the switch (2).
3. Place the shower head (11) in the holder (12) to
attach it to the hook or suction cup, or hold the
shower head in your hand.
2. Place the O-ring (10) in the outlet
(9).
2. Place the pump (1) in water. Note! Important! The
4. Take the pump out of the water to turn it off.
3. Screw the outlet (9) and shower
head (11) together by turning
clockwise.
pump must be fully immersed in the water as long
as it is running.
5