K-EIKO ESP110 Operator's Manual

Orbital sander

Hide thumbs

Table of Contents

Quick Links

Download this manual

INDUSTRIAL POWER TOOLS

Orbital Sander

MODEL ESP110

• Powerful motor

• Large soft grip housing for more improved operation

• Equipped with dust collection system

WARNING: THE SAFETY INFORMATION

GIVEN INSIDE MUST BE READ AND

UNDERSTOOD BY ANY PERSON

USING, INSTALLING, REPAIRING

OR MAINTAINING THESE

TOOLS.

OPERATOR'S MANUAL

Please retain this information for future reference

Table of Contents

Need help?

Do you have a question about the ESP110 and is the answer not in the manual?

Questions and answers

Summary of Contents for K-EIKO ESP110

Page 1 INDUSTRIAL POWER TOOLS Orbital Sander MODEL ESP110 • Powerful motor • Large soft grip housing for more improved operation • Equipped with dust collection system WARNING: THE SAFETY INFORMATION GIVEN INSIDE MUST BE READ AND UNDERSTOOD BY ANY PERSON USING, INSTALLING, REPAIRING OR MAINTAINING THESE TOOLS.
Page 2 d) Remove any adjusting key or wrench before GENERAL SAFETY RULES turning the power tool on. A wrench or a key left attached to a rotating part WARNING! of the power tool may result in personal injury. Read all instructions e) Do not overreach.
Page 3 SPECIFICATIONS Voltage (by areas)* (110V, 120V, 220V, 230V, 240V) Power Input 200W* –1 No-load speed 14000 min 110 mm × 100 mm Sanding pad size 114 mm × 140 mm Sanding paper size Weight (without cord) 1.1 kg *Be sure to check the nameplate on product as it is subject to change by areas. 4.
Page 4 CAUTION The sanding paper must be precisely installed on the pad, ensuring that there is ample tension (leaving no slack). Loosely installed sanding paper could result in unevenly sanded surfaces and/or damage to the sanding paper itself. 5. Attaching and Removing the Dust Bag (1) Attaching the Dust Bag As shown in Fig.
Page 5 6. Service parts list CAUTION Repair, modification and inspection of K-EIKO Power Tools must be carried out by an K-EIKO Authorized Service Center. This Parts List will be helpful if presented with the tool to the K-EIKO Authorized Service Center when Only for EU countries requesting repair or other maintenance.
Page 8 EC DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with standards or standardized documents EN60745, EN55014 and EN61000-3 in accordance with Council Directives 73/23/EEC, 89/336/EEC and 98/37/EC. Manufactured for KENNEDY TOOLS Wigston Works, Leicester, England. ISO 9002 REGISTERED COMPANY Signed: Date: 31 January 2007...