Turning Away Mode On; Range Away; System Geolocation Change - Immergas SMARTECH PLUS Instructions And Warnings

To remove all the Smartphones joined to the System, simply press "RESET
ALL DEVICES" (Fig. 48).
48

5.5 TURNING AWAY MODE ON

Once you have joined your Smartphone to the System as described in
(Paragraph 5.3), you can turn on the Away function on the same System.
Pressing the "house" Away button circled in red in the bottom right corner
(Fig. 49) on the main screen will open the function options:
- automatic, the mode stays on until it is turned off;
- manual, the mode stays on for a set number of hours;
- Off, the mode is turned off.
49
The Away mode is on if the house icon on the main screen is red (Fig. 50).
50

5.6 RANGE AWAY

When the AWAY mode is on, you can check the "range AWAY" of the
joined devices (Smartphones) based on their "in" or "out" status as indi-
cated in (Fig. 51).
51
Note: all joined devices (Smartphones) must have an "out" status in order
to turn the AWAY function on.
To switch from the "in" status to the "out" status, exit the "range AWAY"
with your device (Smartphone).

5.7 SYSTEM GEOLOCATION CHANGE

The geolocation of the System is linked to the procedure shown in (Para-
graph 1.3) in the second Note.
Each time you change the password of the Wi-Fi network to which the
Gateway is connected or join a new System to the Account, the location is
recorded by geolocation of the Smartphone.
31