Do you have a question about the Y'ello Biz and is the answer not in the manual?
Questions and answers
Summary of Contents for MTN Y'ello Biz
Page 1
MTN Business Y’ello Biz user manual Unboxing the phone Depending on your order, you should have received a few packages containing phone/s, network (LAN) cables and power supplies. If you ordered either the Yealink T40P or T41S, please follow the steps below: 1.
Page 2
Connect the network (LAN) cable to the network connector. Handset connector The handset cord is connected to the phone. 5. Connect the free end of the network (LAN) cable to the back of the MTN fixed-LTE router. Handset connected Power cable connected 6.
Page 3
This is used to activate and deactivate ‘Do Not Disturb’. Menu Use this to configure the phone. Note: If the phone is displaying ‘Network unavailable’, this might be because either the network (LAN) cable is not connected, or the MTN fixed-LTE router is switched off. Phone Network Power...
Page 4
2. Connect the network (LAN) cable to the network connector on the DECT base station. 5. Connect the spare end of the network (LAN) cable to the back of the MTN fixed-LTE router. Network cable connected to the base station 3.
Page 5
If, for some reason, the phones are not working correctly, or you cannot make or receive calls, please contact our MTN support centre on 087 049 3999 during business hours, Monday to Friday, or please send an email to support@mtnbusiness.com...
Need help?
Do you have a question about the Y'ello Biz and is the answer not in the manual?
Questions and answers