Advertisement
Unscrew tail cap. Remove
1
battery pack
Insert battery pack into flashlight. Replace tail cap
3
FRESH ALKALINE BATTERIES ARE STRONGLY RECOMMENDED.
DO NOT MIX OLD AND NEW, OR DIFFERENT TYPES OF BATTERIES
To turn flashlight ON / OFF, firmly press the
ON / OFF button. You will hear a "click,"
and the light will turn ON. Firmly press
again, and the flashlight will turn OFF.
Note: The next time the button is
pressed, the light will advance to the
next mode.
Installing 9 AA Batteries
Turning ON / OFF - Switching Modes
To cycle through light modes (without
turning the flashlight off), press button in
halfway. The button will not click, and the
light will advance to the next mode.
Insert 9 AA batteries according to polarity (+/-) as
2
indicated on battery pack
5 LIGHT MODES:
High Power Light
1
Medium Power Light
2
Low Power Light
3
Flash
4
S.O.S.
5
Auto High Mode: Turn
OFF from any mode.
Wait 10 seconds. Turn
flashlight back ON, and
it will automatically
turn ON in "High Power
Light" mode.
Advertisement
