Advertisement
Quick Links
1
Measure your stoma and cut the baseplate
to the appropriate size/shape. Remove the
protective backing from the baseplate,
exposing the adhesive part.
3
Use your thumbs to lift the purple ring
up away from baseplate, "pop it up".
2
Centre the baseplate opening over the
stoma and press into place. To secure
well, press the baseplate outwards
from the stoma to the outer edge.
4
Connect the pouch to the baseplate,
squeezing the rings together. You will hear
an audible "click" as they connect. Walk your
fingers around the ring to make sure your
pouch is securely attached to the baseplate.
OMNIGON
Advertisement
Related Manuals for Omnigon eakin dot
Summary of Contents for Omnigon eakin dot
- Page 1 Use your thumbs to lift the purple ring squeezing the rings together. You will hear up away from baseplate, “pop it up”. an audible “click” as they connect. Walk your fingers around the ring to make sure your pouch is securely attached to the baseplate. OMNIGON...
- Page 2 To separate the pouch from the baseplate, support baseplate to the skin with one hand, locate plastic tab at top of the pouch with the other hand. Gently “peel” the pouch away from the baseplate in a downward motion, it will not just pull off. OMNIGON...