Galaxy Legacy 902518 Installation & Operating Instructions

RETURNING UNITS Please contact your retail store for returns.
WARRANTY This unit, when properly used will provide you with years of service. It is
covered under a 3 year warranty. This warranty will be voided if the unit is misused, abused
or altered. Warranty repair or replacement will be at the sole discretion of the manufacturer.
Defective units need to be returned to the place of purchase with proof of purchase/receipt.
This warranty is expressly in lieu of all other warranties, expressed or implied, including the
warranties of merchantability and fitness for use and of all other obligations or liabilities
on the part of the seller. This warranty shall not apply to this product or any part thereof
which has been damaged by accident, abuse, misuse, modification, negligence, alteration or
misapplication. Manufacturer makes no warranty whatsoever in respect to accessories or parts
not supplied by manufacturer. This warranty shall apply only to the United States, including
Alaska, Hawaii and territories of the United States and Canada. This warranty does not cover
labor, materials, travel time, equipment, etc. to de-install and install any lighting fixtures or
other equipment.
Part 18 compliance
Advisory statement
The interference potential
of the device or system
Maintenance of the system
Simple measures that can be taken
by the user to correct interference
 This product contains delicate electronic components. This means that if it is
placed near an object that transmits radio signals, it could cause interference. This
could be, for example, mobile telephones, walkie talkies, CB radios, remote con-
trols and microwaves. If interference occurs, move such objects away from
the appliance.
Galaxy Legacy Select-A-Watt 600/750/1000/Turbo Charge 120/240 Volt:
FCC#: 2AEHV902518
This device complies with Part 18 of the FCC Rules.
This product may cause interference to radio equipment and
should not be installed near maritime safety communications
equipment or other critical navigation or communication
equipment operating between 0.45-30 MHz.
The interference potential of the device or system is the
operating frequency; 65 kHz.
Unplug the unit, wait 30 seconds, and plug the unit back in.
Move the unit away from any radio device.
Installation/Operating Instructions
Galaxy Legacy
®
Amp Models:
902518 - 1000 WATT
902510 - 1000 WATT/240V
READ THESE INSTRUCTIONS BEFORE FIRING UP YOUR BALLAST
KEEP ORIGINAL PACKAGING— all returns need to be in the original packaging
in order to avoid product damage during shipping. Any damage to products not in
their original packaging will not be covered under warranty.
SAFETY FIRST! Failure to observe the following safety warnings may result in
serious injury. In addition, failure to observe these safety warnings will result in a
waiver of all liabilities and will void all warranties.
WARNING
 If the exterior of the lamp is damaged, replace lamp immediately.
 When re-lamping, make sure lamp has time to cool before touching.
 Make sure power cord and lamp cord are connected properly.
 Disconnect power before re-lamping.
 DO NOT hang by power or lamp cord.
 DO NOT make contact with the interior of the socket while power is on.
 DO NOT operate light systems in wet locations.
 D O NOT plug system into supply voltage other than what is designated on ballast.
 D O NOT attempt to rewire or reconfigure your system, it will void warranty and
could cause serious safety hazards (i.e. power cord, lamp cord, lamp socket or ballast).
 Keep away from children.
®