Related Manuals for Tail It Bike
Summary of Contents for Tail It Bike
- Page 1 User manual – Tail it Bike Tail it Bike user manual V1.0.0 TAIL IT TECHNOLOGIES | Fossegrenda 9...
-
Page 2: Table Of Contents
2.Set up device ............................... 3 3. Activation of SIM-card ..........................3 4. Set up and registration in app– Tail it ......................4 5. Add new device in app – Tail it ........................5 6. Share device with other users – Tail it ......................5 7. -
Page 3: Introduction - 3 Step Installation
1.Introduction – 3 step installation... -
Page 4: Set Up Device
2.Set up device 1. Open the box you have received and take the tracker and charger out of the box. 2. There will be some power on the battery in your tracker when you receive it, but to be sure, we recommend that you charge the tracker for a while. Estimated charging time for full power on the battery is between 3-5 hours. -
Page 5: Set Up And Registration In App- Tail It
PUK codes and mobile number (Check spam if you do not receive the e-mail) 4. Set up and registration in app– Tail it 1. Visit the app store (iOs) or Google Play (Android) on your phone and search for "Tail it"... -
Page 6: Add New Device In App - Tail It
5. Add new device in app – Tail it 1. When you come to the screen where you can add a device, press "Let's get started" 2. Scan the QR code found on the declaration of conformity, or type in the 5 digits you see on the sticker on the device. -
Page 7: Update Position
4. You can also find this code by pressing on the device in the “devices tab”, where you will be forwarded to a menu where you can choose to share the device. Then a new code will be added that others can add to to the device in their app. This code only works for 5 minutes at a time. -
Page 8: General Information
8. General information 1. To make changes to your device or to add more people who can see the device, simply click on the device, and you will find this menu. - Page 9 2. Inside the screen where you can change your device, you can rename it, change image, see how much remaining battery there is on the tracker and you can see which other users also have access to the tracker. 3. To update the main screen after updating your location, drag down the main screen. Then you will see the latest update you made on your device.
- Page 10 5. To enter the map to see where your device is located, tap the map icon on the device under “devices” in the app and the map will appear. The blue little dot is your own position on your mobile, and the device is the slightly larger location needle with a picture in the middle.
-
Page 11: Position Logic
This will be a little less accurate than GPS. If the Tail it Kids watch can’t access WiFi or satellites, it will use LBS to update position. This is an emergency solution, to roughly show you the area where the watch is located. To get some better insight in how these updates are chosen, see illustrations below. - Page 13 9. installation 1. Insert the Tail it bike in to the bike handlebar 2. Make sure the arrow is pointing up. 3. Tighten the screws with the included screwdriver 4. Tighten to the tracker is firmly in place(make sure you tighten the screws equal) 5.
-
Page 14: Installation Of The Device
6. The end of the tracker also has a rubber layer, so if you have a smaller handlebar, this can be removed so it will fit better.