Advertisement
VetFlo Heavy Duty Rolling Stand
The VetFlo Heavy Duty Rolling Stand is compatible with the Kent Scientific VetFlo Anesthesia System
and can be used with many other free-standing anesthesia systems.
This product is not designed, intended or authorized for use in human applications.
VetFlo Heavy Duty Rolling Stand
Local: 860-626-1172 Toll-Free: 888-572-8887 kentscientific.com
Page 1 of 3
01.11.20
Part No. 10-1000-224
1116 Litchfield Street, Torrington, Connecticut 06790
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Kent Scientific Kent Scientific
- Page 1 VetFlo Heavy Duty Rolling Stand The VetFlo Heavy Duty Rolling Stand is compatible with the Kent Scientific VetFlo Anesthesia System and can be used with many other free-standing anesthesia systems. This product is not designed, intended or authorized for use in human applications.
- Page 2 Assembly Instructions 1) Insert the Roll Stand Post into the Base. Use the included Screw Pad and Hand Screw hardware to secure. 2) Attach the tray kit to the top of the pole using the included Hex Head Cap Screw hardware. 3) Use the included Hex Head Cap Screws to attach the mounting plate to the swivel/tilt head.
- Page 3 4) Install the accessory basket onto the length of the pole. 5) Attach the gas tank holders to the lower portion of the pole using the included hardware. Note: The holders can be placed at different heights to accommodate standard D and E gas tanks. 6) Attach the Anesthesia Stand by sliding the tray kit onto the transition plate.
Need help?
Do you have a question about the Kent Scientific and is the answer not in the manual?
Questions and answers