MasterFlow 1050 Manual

MasterFlow 1050 Portable Air Compressor Manual

SPECIFICATIONS:

Motor: 12-Volt DC
Fuse: 30 Amps
Maximum working pressure: 120 psi
Maximum re-start pressure: 150 psi
Maximum recommended continuous operating time: 40 minutes
Recommended on/off cycle time: 15/30 minutes
CAUTION:
The compressor only operates with a 12-volt electrical system.
Use extreme caution when connecting the unit to a power source, as batteries can vent
explosive gasses. Avoid connections that could produce a spark. Consult your vehicle's
owner's manual or a qualified mechanic for proper connection procedure.
After 30 minutes of continuous operation, allow the unit to cool before restarting.
Damage can occur from continued overuse.
The compressor was permanently lubricated during assembly. Do not add oil or any
other lubricant.
The unit will become hot during use. Please use caution when touching the unit, in order
to avoid burns.
Only hold the unit by the carry handle and allow the unit to cool before storing.
Only inflate tires to the manufacturer's recommended pressure. Do not over inflate, as
tire failure or serious injury could occur.
The use of work gloves and safety glasses is recommended when operating the
SUPERFLOW unit.
Keep the SUPERFLOW unit out of reach of small children. Clean with a damp cloth
only. Do not use chemicals or soap.
Do not use the unit for pumping, compressing or transferring any gas or liquid other than
air. The unit is not designed for use as a source of breathable air.
There are n o user serviceable parts inside the unit. Do not disassemble.

Overheating, Protection Circuit: