Breville Silhouette Flatbed Compact LMO420 BLKANZ Instruction Book page 17

AUTO COOK MENU GUIDE
Auto Auto Menu Weight/Portion
1 Beverage
2
Rice
3 Pasta
4 Potato
5 Auto Reheat 200g
6
Porridge
7 Pizza
8 Popcorn
*When cooking 150g of rice add an extra ¼ cup water.
Default
Time
1 Portion/200ml 1.3
2 Portions/400ml 2.4
3 Portions/600ml 3.5
150g 18*
300g 18
450g 22
600g 24
100g 13
200g 20
300g 24
1 Portion/230g 5
2 Portions/460g 8
3 Portions/690g 12
2
300g 2.3
400g 3
500g 3.3
600g 4
700g 4.3
800g 5.3
50g 2
100g 3.45
150g 5
150g 1
300g 1.4
450g 2.2
100g 2.4
PRESET COOKING
• The PRESET button allows you to pre-
program a future cooking start time up
to 24 hours across the various microwave
functions; Auto Cook, Multi-Stage Cooking,
Weight or Time Defrost.
• The microwave function of choice must be
programmed prior to using the PRESET
button.
• If no action is taken after 20 seconds
during programming, the LED display will
revert back to the CLOCK time set, and re-
programming will be required.
Example: To preset the heating of
2 beverages at 5:00am, using the
PRESET function.
1. To preset the start time when using the
AUTO COOK menu selection, Beverage,
turn the TIME ADJUST/AUTO COOK dial
anti-clockwise to display 1 (for Beverage),
press the WEIGHT/ADJUST button and
turn the TIME ADJUST/AUTO COOK
dial to select 2 Beverages, then press the
PRESET button to set the time you require
the microwave oven to start.
2. The hour digits will flash on the display.
Turn the TIME ADJUST/AUTO COOK
dial to adjust the hours to display '5'. Press
the PRESET button again to change to
minutes. The minute digits will flash.
Turn the TIME ADJUST/AUTO COOK
dial to adjust the minutes to display '00'.
The preset button is now set to heat
2 beverages at 5:00am.
3. Push the START/+30 SEC dial to start.
The clock icon on the display will flash to
indicate that the preset has been set. The
microwave will start at the time set.
• To check the programmed start time, press
the PRESET button.
• To cancel Preset at any time, press the
PRESET button and when the programmed
start time is displayed, press the STOP/
CANCEL button. The clock icon will stop
flashing.
17