Summary of Contents for SimLab Dash SD43-X
- Page 1 SimLab Dash SD43-X PRODUCT MANUAL Copyright 2020 – SimLab | Revision 1.0 (October 2020)
- Page 2 Bolt the adapter plate to the dash using the two supplied M5 bolts Thank you for purchasing the SimLab Dash SD43X. On the following pages you will find a description on what is in the box, how to install the dash. And about which software is supported.
- Page 3 Place the dash in the just created gap and fasten the bolts again. OSW/SimuCube The OSW mounting plate is designed to fit the dash on the most commonly Midge based direct drives. The various slot holes can be used to slightly change the mounting height based on your own preference.
- Page 4 Step 2. 5. Software The Dash SD43-X is supplied with the popular USBD480 screen without touch. All available programs which supporting the USBD480 screen will support the SD43-X. There is no software supplied to the dash, you need to get your own. some are free, other you have to pay a small fee.
Need help?
Do you have a question about the Dash SD43-X and is the answer not in the manual?
Questions and answers