Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DFE TrueView 1100
Summary of Contents for DFE TrueView 1100
- Page 1 INSTRUCTION MANUAL ™ Model 1100 Tension Indicator DOC 801-2573...
- Page 2 Manuals. Call (603) 332-6150 and ask for Customer Service or email us at: customerservice@dfe.com SALES - Product Information, System Application Questions or Placing Orders, Please e-mail us at: sales@dfe.com or call (603) 332-6150 and ask for Sales. Telephone: (603) 332-6150 Fax: (603) 332-3758 E-mail: info@dfe.com...
- Page 3 Make sure you read and understand all instructions and safety precautions listed in this manual before installing or operating your TrueView™ 1100 Indicator. If you have any questions concerning the operation of your device or the information in this manual, please contact us. Email: techsupport@dfe.com Telephone: (603) 332-6150 Observe all warning labels.
-
Page 4: Table Of Contents
Table of Contents OVERVIEW / DEVICE DESCRIPTION ................. 1 GENERAL DESCRIPTION ....................1 SPECIFICATIONS ......................1 FEATURES........................... 1 INSTALLATION ......................2 2.1. DIMENSIONS........................2 MOUNTING THE UNIT....................... 2 Din Rail Mount ........................2 Panel Mount ........................2 Pole Mount: ........................2 STANDARD ELECTRICAL CONNECTIONS .............. -
Page 5: Overview / Device Description
The TrueView™ 1100 Indicator is a compact, versatile single-channel tension transducer interface. It can be used with DFE tension transducers to monitor tension in any zone on web or filament processing machinery. The standard configuration for the 1100TV is a 4.9" x 3.75"... -
Page 6: Installation
INSTALLATION 2.1. DIMENSIONS MOUNTING THE UNIT There are three mounting choices: Din Rail Mount : Compatible with 35mm DIN rail. Screw DIN rail clip to back of unit with provided mounting screws. Clip the top of the DIN rail clip onto the top of the DIN rail and pull down while pushing forward slightly to snap the unit onto the rail. -
Page 7: Standard Electrical Connections
INSTALLATION (continued) STANDARD ELECTRICAL CONNECTIONS 1. Power Input Power should be sourced to the 1100TV on Pins 16 (GND) and 15 (+24 VDC). 2. Tension Output (Optional) The tension output signal is provided in two options: 0-10 VDC is available on Pins 9 (Return) and 11 (0-10 VDC) •... -
Page 8: Operation
Display Brightness - Adjust between 10% and 100% and press SAVE. 2. Diagnostics This menu is for discussions with DFE Tech Support if needed. Figure 3b - DISPLAY CONFIGURATION 3. Calibration Menu and Service Access When selecting either of these menus, a screen (Fig. -
Page 9: Calibration
CALIBRATION A calibration process must be performed before the indicator is ready to indicate tension. Select an appropriate calibration weight. The weight determines the value of web tension that will produce full output of the 1100TV. For example: A 10 lb weight will result in full output of 100 lbs of tension if the 10% calibration is performed. -
Page 10: Zeroing The Indicator
CALIBRATION (continued) Zeroing the Indicator The first step of any calibration is Zeroing out the amplifier. Per the Zero Tension screen (Fig. 9), check the transducer roll to make sure that nothing is hanging from, resting on, or leaning against it, including the calibration rope or cord. -
Page 11: Calibration Procedure
CALIBRATION (continued) 3. Calibration Procedure continued… The Calibrate button will turn green and the red text will disappear when the conditions required for calibration have been met (Fig. 13). When ready, press the Calibrate button and the screen will indicate that the calibration was successful (Fig. -
Page 12: Troubleshooting
Reduce wrap angle to reduce effective net force exerted on load cell. EXCITATION SHORT: Wiring or load cell failure. • Action Required: Check for shorts in the transducer (load cell) wiring. If the transducers need troubleshooting – contact tech support for assistance. Action Required: Contact DFE for load cell replacement. -
Page 13: Terms And Conditions Of Sale And Shipment
Special Product Requests (SPRs), product manufactured specially abuse, neglect, accident, modification, alteration or mis-use. to customer specifications, and non-DFE product purchased on Normal wear is not warrantied. All repairs and replacements under customer behalf shall not be returnable for any reason. Buyer will... - Page 14 307 PICKERING ROAD ROCHESTER, NEW HAMPSHIRE 03867-4630 U.S.A TEL: (603) 332-6150 FAX: (603) 332-3758 E-mail: info@dfe.com Internet: www.dfe.com CANADA EUROPE MEXICO UNITED KINGDOM TAIWAN KOREA CHINA INDIA AUSTRALIA SOUTH AFRICA ©2020 DOVER FLEXO ELECTRONICS, INC. DOC 801-2573 ALL RIGHTS RESERVED...
Need help?
Do you have a question about the TrueView 1100 and is the answer not in the manual?
Questions and answers