Do you have a question about the GS120 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for GEOSATpro GS120
Page 1
DiSEqC 1.2 Motorized H Motor DiSEqC 1.2 Motorized H-H Motor H Motor GEOSATpro GS120 Compatible with DiSEqC 1.2 & USALS Receivers Adjustable Hardware Limiters for 140 Degree Coverage Goto X Preprogrammed for North American Satellites LED Indicator for Power and DiSEqC Verification...
Page 2
2. Rotate the Motor Mount on the Mounting Pole toward TRUE SOUTH. True South can be calculated by adding or subtracting the installation location's magnetic deviation to the compass reading. Magnetic deviation charts are available at: http://www.geosatpro.com or http://www.ngdc.noaa.gov/seg/WMM/ - 1 -...
Page 3
Set the Motor Angle Scale to match the installation location Latitude. 2. Mount the Dish: Find the Dish Angle Settings on Page 6 of this manual. Set the Dish Angle using the elevation scale on the antenna dish. - 2 - http://www.geosatpro.com...
Page 4
The LED on the bottom of the Motor can show the following information Color Status Indication Green Power On; Standby Mode Orange Blink Receiving DiSEqC 1.2 Commands / Reset Mode Orange Error Message: Over Current / Reach Hardware Limits … - 3 - http://www.geosatpro.com...
Page 5
( For example, 15.2° East on the bottom of the motor.) g) Just input the longitude, some receivers can drive the antenna to focus on the right Satellites automatically after locating and peaking the first satellite. - 4 - http://www.geosatpro.com...
Page 6
1. Check if the dish is too heavy. The maximum size of the The Motor doesn’t make any antenna is 1.2 m. 2. The DC motor inside is damaged. Please contact your vendor movement, but clicks from inside for repair. of the motor can be heard - 5 - http://www.geosatpro.com...
Need help?
Do you have a question about the GS120 and is the answer not in the manual?
Questions and answers