Summary of Contents for Avalue Technology REN-CBW
- Page 1 REN-CBW & EBC-05B1 Renity CBS Gateway 5.65” E-ink Bedside Card Quick Reference Guide Ed – 07 December 2020 Copyright Notice Copyright 2020 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E2017RBW0A2R...
- Page 2 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide 2 REN-CBW & EBC-05B1 Quick Reference Guide...
- Page 3 These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first. To receive the latest version of the user’s manual; please visit our Web site at: http://www.avalue.com.tw/ REN-CBW & EBC-05B1 Quick Reference Guide...
-
Page 4: Table Of Contents
2.1 REN-CBW & EBC-05B1 Overview ................13 2.1.1 REN-CBW ..........................13 2.1.2 EBC-05B1 ..........................14 2.2 REN-CBW Jumper and Connector List ..............15 2.3 REN-CBW Jumpers & Connectors settings ............16 2.4 EBC-05B1 Connector List ..................20 2.5 EBC-05B1 Connectors settings................21 System Setup ......................25 3.1 Become Familiar ..................... - Page 5 Button Description ......................... 47 4.5 Device Status Management ..................48 4.5.1 E Ink Card Status Management .................... 48 4.5.2 CBS Status Management ...................... 48 4.6 Log in / Log out ....................... 49 4.6.1 Login Account ........................49 REN-CBW & EBC-05B1 Quick Reference Guide...
-
Page 6: Getting Started
1 x REN-CBW 1 x Adapter & Cord Patient Information Display (EBC-05B1) 1 x EBC-05B1 (*Batteries are not included) Optional Box PC Server (EPS-CFS2) 1 x EPS-CFS2 1 x Adapter & Cord 6 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 7: System Specifications
Avalue Standard Test Criteria : Sine wave/10G Test Drop Test Avalue Standard Test Criteria Operating 0°C ~40°C Temperature Operating Humidity 40°C @ 95% Relative Humidity, Non-condensing Storage Temperature 0°C ~ 60°C Power Consumption BLE transmission 80mBLE range Drop Spec. 120cm REN-CBW & EBC-05B1 Quick Reference Guide... - Page 8 1Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 30min/axis Mechanical Shock 10Grms, IEC 60068-2-27, Half Sine, 11ms Test Drop Test EC-60068-2-32 (96.5cm) Operating 0°C ~40°C Temperature Operating Humidity 40°C @ 95% Relative Humidity, Non-condensing Storage Temperature -20 ~ 60 °C 8 REN-CBW & EBC-05B1 Quick Reference Guide...
- Page 9 Quick Reference Guide Note: Specifications are subject to change without notice. REN-CBW & EBC-05B1 Quick Reference Guide...
-
Page 10: System Dimensions
REN-CBW & EBC-05B1 1.4 System Dimensions 1.4.1 REN-CBW (Unit: mm) 10 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 11: Ebc-05B1
Quick Reference Guide 1.4.2 EBC-05B1 (Unit: mm) REN-CBW & EBC-05B1 Quick Reference Guide 11... -
Page 12: Hardware Configuration
REN-CBW & EBC-05B1 2. Hardware Configuration Note: If you need more information, please visit our website: http://www.avalue.com.tw 12 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 13: Ren-Cbw & Ebc-05B1 Overview
Quick Reference Guide 2.1 REN-CBW & EBC-05B1 Overview 2.1.1 REN-CBW REN-CBW & EBC-05B1 Quick Reference Guide 13... -
Page 14: Ebc-05B1
REN-CBW & EBC-05B1 2.1.2 EBC-05B1 14 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 15: Ren-Cbw Jumper And Connector List
Debug ESP32 connector 2 x 1 header, pitch 2.00mm JE32DBG1 JM50DBG1 Debug M50Q connector 4 x 1 header, pitch 2.00mm I2C connector 2 x 1 header, pitch 2.00mm JI2C1 JPWR1 DC/USB IN connector REN-CBW & EBC-05B1 Quick Reference Guide 15... -
Page 16: Ren-Cbw Jumpers & Connectors Settings
REN-CBW & EBC-05B1 2.3 REN-CBW Jumpers & Connectors settings 2.3.1 Write protection (JSPI_WP1) LOW* HIGH * Default 2.3.2 Boot selector (JBOOT1) SPI BOOT* Download BOOT * Default 16 REN-CBW & EBC-05B1 Quick Reference Guide... - Page 17 Quick Reference Guide 2.3.3 SPI connector (JSPI1) Signal PIN PIN Signal +3.3VSB SPI_CS_RST# SPI_CLK SPI_IO1 SPI_IO0 SPI_IO3_HOLD# SPI_IO2_WP# 2.3.4 SWD connector (JSWD1) Signal +3.3VSB SWDIO SWDCLK REN-CBW & EBC-05B1 Quick Reference Guide 17...
- Page 18 REN-CBW & EBC-05B1 2.3.5 UART Debug ESP32 connector (JUART1) Signal +3.3VSB ESP32_UART_TX +3.3VSB ESP32_UART_RX 2.3.6 UART Debug M50Q connector (JUART2) Signal +3.3VSB M50Q_UART_RX +3.3VSB M50Q_UART_TX 18 REN-CBW & EBC-05B1 Quick Reference Guide...
- Page 19 Quick Reference Guide 2.3.7 Debug ESP32 connector (JE32DBG1) Signal ESP32_EN 2.3.8 Debug M50Q connector (JM50DGB1) Signal M50Q_RX M50Q_TX M50Q_RTS M50Q_CTS REN-CBW & EBC-05B1 Quick Reference Guide 19...
-
Page 20: Ebc-05B1 Connector List
24 x 1 wafer, pitch 0.50mm FPC connector 2 JFPC2 24 x 1 wafer, pitch 0.50mm JSWD1 SWD UART Debug connector 6 x 1 header, pitch 2.00mm JSPI1 SPI connector 4 x 2 header, pitch 2.00mm 20 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 21: Ebc-05B1 Connectors Settings
Quick Reference Guide 2.5 EBC-05B1 Connectors settings 2.5.1 SPI connector (JSPI1) Signal PIN PIN Signal SPI0_IO2_WP# SPI0_IO3_HOLD# SPI0_IO0 SPI0_IO1 SPI0_CLK SPI0_CS# +2.8VSB 2.5.2 SWD UART Debug connector (JSWD1) Signal DUART_RX DUART_TX SWDCLK SWDIO +3.0VSB REN-CBW & EBC-05B1 Quick Reference Guide 21... - Page 22 REN-CBW & EBC-05B1 2.5.3 FPCA connector (BB_JFPCA_1) Signal BUTN3 BUTN2 BUTN1 BUTN0 LED3_B# LED2_G# LED1_R# +2.8V 22 REN-CBW & EBC-05B1 Quick Reference Guide...
- Page 23 Quick Reference Guide 2.5.4 FPC connector 1 (JFPC1) Signal SPI1_CS2# EPD_GDR EPD_RESET EPD_TSCL EPD_TSDA I2C1_SCL EPD_BUSY EPD_RESET# SPI1_DCX SPI1_CS1# SPI1_CLK SPI1_MOSI +2.8VSB +2.8VSB EPD_VDD SPI1_MISO PREVGH PREVGL VCOM REN-CBW & EBC-05B1 Quick Reference Guide 23...
- Page 24 REN-CBW & EBC-05B1 2.5.5 FPC connector 2 (JFPC2) Signal BTN3_R LED1_B# LED2_B# BTN0_R LED3B# LED2G# LED1R# +2.8VSB 24 REN-CBW & EBC-05B1 Quick Reference Guide...
-
Page 25: System Setup
Quick Reference Guide 3. System Setup REN-CBW & EBC-05B1 Quick Reference Guide 25... -
Page 26: Become Familiar
3 seconds. ▲ EBC-05B1 Without actions, the light will automatically turns off after 180 seconds. 26 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 27: Setup Arrangement
2. Setup Mini Server (Box PC) Box PC LAN port 1 must be connected to WIFI AP’s LAN port. 3. Login with box pc to web-based management platform using the correct account and passwords. Website: http://192.168.1.227/login REN-CBW & EBC-05B1 Quick Reference Guide 27... -
Page 28: Installing Ren-Cbw Gateway
Adhesive Tape Note: 1. Clean the surface area before use. 2. This adhesive tape can be fixed or mount on the object. 3. This adhesive tape is reusable with wipe of water. 28 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 29: Installing Batteries To Ebc-05B1 Patient Information Display
3.4 Installing Batteries to EBC-05B1 Patient Information Display Step1. Remove the battery cover. Step2. Press the battery spring, when removing batteries or replacing new one. Step3. Re-assemble your system back through previous steps to complete the installation. REN-CBW & EBC-05B1 Quick Reference Guide 29... -
Page 30: Smart Ward Display Solution Software Guide
REN-CBW & EBC-05B1 4. Smart Ward Display Solution Software Guide 30 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 31: Operation Interface Description
Quick Reference Guide 4.1 Operation interface description 4.1.1 Interface ① Main Menu︰Main Settings ② Header︰Account Login/Language/Notification ③ Sub-function Menu ④ Search and Data List ⑤ Data List ⑥ Function Buttons REN-CBW & EBC-05B1 Quick Reference Guide 31... -
Page 32: Settings
REN-CBW & EBC-05B1 4.2 Settings 4.2.1 Basic Operation Instructions- Adding Beds This management system takes hospital bed equipment as basic structure. The system management structure is illustrated as follows: 32 REN-CBW & EBC-05B1 Quick Reference Guide... - Page 33 Quick Reference Guide Click Setup from left main menu to enter Bed sub-menu, then click the Add icon on lower right corner. After filling in bed and patient information, click“Add”to complete the process. REN-CBW & EBC-05B1 Quick Reference Guide 33...
-
Page 34: Edit Bed Status
REN-CBW & EBC-05B1 4.2.2 Edit Bed Status Click the edit icon on the right side of the profile list. Modify bed and E Ink Card Setting. Click "Update" to complete the modification of bed information. 34 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 35: Deleting Beds
Quick Reference Guide 4.2.3 Deleting Beds Click the delete icon on the right side of the profile list. Click "OK" to delete the bed. REN-CBW & EBC-05B1 Quick Reference Guide 35... -
Page 36: E Ink Card Setting
REN-CBW & EBC-05B1 4.2.4 E Ink Card Setting 4.2.5 CBS Management 36 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 37: User Management
Quick Reference Guide 4.2.6 User Management REN-CBW & EBC-05B1 Quick Reference Guide 37... -
Page 38: Patient Management
Click on the main menu on the left, and the patient screen will show on the patient data by default. After filling in the patient information completely, click "Update" to complete the process. 38 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 39: Patient Management- Add Patient Info
Quick Reference Guide 4.3.2 Patient Management- Add Patient Info Click to edit icon to adjust patient related information. REN-CBW & EBC-05B1 Quick Reference Guide 39... -
Page 40: Patient Management- Delete Patient Info (Directly)
REN-CBW & EBC-05B1 4.3.3 Patient Management- Delete Patient Info (Directly) Click Push icon. Click "OK“ to complete the patient profile push. 40 REN-CBW & EBC-05B1 Quick Reference Guide... - Page 41 Quick Reference Guide Click Delete icon. Click "OK“ to complete the patient profile push REN-CBW & EBC-05B1 Quick Reference Guide 41...
-
Page 42: Patient Management- Delete Patient Info (From Edit)
REN-CBW & EBC-05B1 4.3.4 Patient Management- Delete Patient Info (From Edit) Click Edit icon. Click Delete icon at the bottom right to delete the patient info. 42 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 43: E Ink Card Screen Setting
Click on the main menu on the left, and the patient screen will show on the patient data by default. Click E Ink Card Setting icon. Click Setting icon to setting patient related information. REN-CBW & EBC-05B1 Quick Reference Guide 43... - Page 44 REN-CBW & EBC-05B1 Click on the main menu on the left, and the patient screen will show on the patient data by default. Click Push icon to complete the patient profile push. 44 REN-CBW & EBC-05B1 Quick Reference Guide...
- Page 45 Quick Reference Guide Click on the main menu on the left, and click E Ink Card Setting icon on the right. Click the new icon at the bottom right. REN-CBW & EBC-05B1 Quick Reference Guide 45...
-
Page 46: Patient Needs Management
REN-CBW & EBC-05B1 4.4 Patient Needs Management 4.4.1 Patient Needs Management- E Ink Card Operating Instructions 4.4.2 Patient Needs Management- System Data Management Report system requirements after pressing and record the time message was sent. 46 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 47: Button Description
Quick Reference Guide 4.4.3 Button Description Click the bell icon on upper right corner to enter notification center to pay attention to patient needs in time. REN-CBW & EBC-05B1 Quick Reference Guide 47... -
Page 48: Device Status Management
This unit only provides browsing of E Ink Card device status. (Battery Capacity, signal status and whether the bed is occupied.) 4.5.2 CBS Status Management E INK Card > Btn Set. This unit provides the signal status of CBS device. 48 REN-CBW & EBC-05B1 Quick Reference Guide... -
Page 49: Log In / Log Out
Login Account Enter and fill in the administrator account and password. (Website: http://192.168.1.227/login) Move the mouse to the upper right corner of the screen, logout instruction appears on top of the account name. REN-CBW & EBC-05B1 Quick Reference Guide 49...