Advertisement
Table of Contents
Components
RS-12DN
Blank Filter Holder and Aperture Filter Holder
BG7B Filter Holder
Korry Front Filter
15V Power Supply
Startup Guide
Plug in 15V Power supply to back of RS-12DN
Place correct filter inside RS-12DN
There is a screw to verify that the filter holder is in the correct spot. Ensure that the hole
lines up
RS-12DN Quick Start Guide
Advertisement
Table of Contents
Summary of Contents for gamma scientific RS-12DN
- Page 1 Korry Front Filter 15V Power Supply Startup Guide Plug in 15V Power supply to back of RS-12DN Place correct filter inside RS-12DN There is a screw to verify that the filter holder is in the correct spot. Ensure that the hole...
- Page 2 Power on RS-12DN. The power button is located towards the back of the RS-12DN on the base Warm up lamp for at least 10 minutes before calibrating. This ensures that the lamp is sufficiently warmed up to ensure no drift in the lamp...
- Page 3 For the BG-7B Filter Holder has values for the unscaled NVIS Radiance. These are check values to verify that the system is measuring close to the specified NVIS Radiance.
Need help?
Do you have a question about the RS-12DN and is the answer not in the manual?
Questions and answers