Operating Instruction; Getting Started; Receiving Calls; Making A Call - Maxcom Office KXT400 Quick Start Manual

OPERATING INSTRUCION

GETTING STARTED

Input 3 AA batteries into the batteries compartment according to the correct polarity. The
upper line of LCD will display month, date and time. The lower line will display year.
Insert one end of the line cord to the line jack of the base and the other end to the exchange.
Connect the handset and the unit with coiled line.

RECEIVING CALLS

1. When a call comes, the telephone rings, and LCD displays the seq. number of the call,
the date, time, incoming number and NEW icon.
2. If the number has come twice or more and has not been checked, LCD displays REP
icon.
3. The OUT is displayed when reviewing the outgoing number.
When incoming memory is full, the latest incoming number is always replacing the oldest
number.
NOTE: For the phone to display incoming number and other information, you must
have an active Caller ID subscription with your local telephone exchange company.
From the handset
1. Pick up the handset and talk to the other end
2. After finished, return the handset to the base.
NOTE
Generally telecom transmits the incoming message between the first ring and the second
ring .So please answer the phone after the second ring.

MAKING A CALL

From the Handset
1. Pick up the handset;
2. When hearing the dialing tone, dial the desired number. The LCD will auto-time the
conversation after 6 seconds;
3. After finished, return the handset to the base.
Redialing function
When dialing out a number but the line is busy, Press [REDIAL] key, the number dialed will
be dialed out.

REVIEWING, CALLING BACK AND DELETING INCOMING CALL

The phone can record 38 Incoming calls. Over 38 incoming calls, the earliest one will be
3