Advertisement
Advertisement
Table of Contents
Summary of Contents for Frame My TV IR-2
- Page 1 Instructions Install this component before IR-2 Infrared Relay System installing your TV frame...
- Page 2 Instructions rame IR-2 Infrared Relay System IR-2 Infrared Relay System Instructions This component should be installed before the frame is installed to ensure proper functioning of the TV’s remote control through the frame. Package Contents 1. IR Relay Controller Module 2.
- Page 3 Instructions rame IR-2 Infrared Relay System Step 3: Apply Velcro to the back of the TV where you intend to mount the IR Relay Controller Module (1). Step 4: Attach the IR Relay Controller Module (1) to the back of the TV as shown.
- Page 4 Instructions rame IR-2 Infrared Relay System IR-2 Infrared Relay System Instructions Operation of the Device Powering Up: When the IR Relay System is initially connected to a power source or switched on, the red power light will illuminate and the blue light may flash or appear off entirely if an infrared signal is being detected in the room.
- Page 5 rame 126 Merrimack Street, Methuen, MA 01844 Call 888.TV.FRAME | Main (978) 216-3115 | info@FrameMyTV.com FrameMyTV.com...
Need help?
Do you have a question about the IR-2 and is the answer not in the manual?
Questions and answers