Power Supply Open the battery cover; place the two AAA batteries into the compartment; close the battery cover. After press the ON/OFF button (if the device doesn’t turn on then batteries are empty, please swap the batteries for two new AAA batteries.) 1.
Page 7
Another power source is to plug the control remote into an outlet Make sure blue dots are lined up Plug the cable into the top of the remote...
Then press the M (mode) button to select the desired program. Press “+” or “-” to set the intensity. (Make sure the remote is connected to the face mask otherwise the unit will automatically shut down) Make sure inductor is connected...
Page 9
Press the ON/OFF button Press the M button until desired mode The selected program will start automatically a few seconds after you have reached your desired intensity and run for 30 Press the “+” button till desired intensity...
Page 10
To have the program run indefinitely (without stoping) Press the ON/OFF button Press the M button and “+” button at the same time You will notice the lock button in the upper left corner Now select desired program and intensity...
Programs Program Frequency Intensity Very Low 0.6 gauss Clearer Skin Skin Cell Rejuvenation/ 7.8Hz 0.6 gauss Schumann frequency Medium 25Hz 0.6 gauss Anti-aging/Wrinkles Reduce Puffy Face/ High 1,200Hz 0.6 gauss Swellings...
Page 12
Information or how you use it. Sedona Wellness LPP, make no medical claims, real or implied, as to benefit of our device and methods. Our product is not intended to be used to diagnose, treat, cure or prevent any disease.
Need help?
Do you have a question about the Face Mask and is the answer not in the manual?
Questions and answers