Marabu EUROPE SHOP Assembly Instruction

EUROPE SHOP
ASSEMBLY INSTRUCTIONS
© MARABUCREATIVEUSA.COM
Remove and dispose of the
1
metal bar; this is used only for
transportation of the unit.
Attach the back of the unit to
2
the base with four of the
screws with washers and nuts.
Attach the wheels to the base if
3
desired.
SAFETY NOTICE
The Europe Shop should be securely anchored to a wall
in order to be the most stable. Two units can also be
bolted securely back to back for a free-standing floor
display. Use of the wheels is optional.
SCREWS & WHEELS
4
5
6
TOOLS NEEDED
Attach the top of the unit to the
back with four of the screws
with washers and nuts.
Adhere the plastic holder.
Insert shelf dividers to separate
the colors. Add the retaining
wire in front to prevent tilting.
Item # 175400117
Item # 175400116