Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Ferrari ZEUS
- Page 1 “ZEUS” CORKER OPERATION AND MAINTENANCE MANUAL...
-
Page 2: Table Of Contents
PRESENTATION / TABLE OF CONTENTS Dear Customer, Thank you for choosing FERRARI GROUP SRL. Please read the instructions in this manual carefully. The proper use and maintenance of this corker will help to ensure that it reaches its maximum life expectancy as well as keep the warranty valid. -
Page 3: Introduction
Warranty WARRANTY FERRARI GROUP SRL warrants the corker described in this manual for a period of 5 YEARS starting from the date of delivery. Within this period, the manufacturer agrees to repair or replace faulty parts, provided that the corker has been properly used in compliance with the instructions included in this operation and maintenance manual. -
Page 4: Usage Conditions And Limitations
Usage conditions and limitations USAGE CONDITIONS AND LIMITATIONS The Zeus corker is a manual corking machine and has been designed to cork bottles only with corks made of cork or synthetic material. The maximum dimensions of both corks and bottles are specified in the “Overview table 1”... -
Page 5: Technical Specifications And Kit
The “preliminary operations” section covers the procedures for assembling the parts listed above. All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l. - Page 6 TECHNICAL SPECIFICATIONS AND KIT Technical specifications and Kit The base of the “Zeus” corker consists of 4 adjustable feet with non-slip rubber which are also suitable for uneven floors. The machine can be transported manually as has 2 wheels and a handle for pulling it.
-
Page 7: Preliminary Operations
Extension Extension Adjustment platform Adjustment platform knob extender knob extender All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l. -
Page 8: Configuration For 8 -12 Liter Bottles
PRELIMINARY OPERATIONS Preliminary operations Configuration for 8 -12 liter bottles Follow the instructions below to assemble the kit for large bottles: 1) Remove the end part of the corking lever. 2) Unscrew the 6 setscrews of the clear safety guard 3) Now remove the safety guard 4) Insert the prism lock pin. - Page 9 13) Remove the prism lock pin. 14) Put the safety guard back on All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l.
-
Page 10: Configuration For 5 Liter Bottles
PRELIMINARY OPERATIONS Preliminary operations CAUTION The 19 mm eccentric plunger must always be mounted with the kit, in order not to damage the 4 prisms Configuration for 5 liter bottles Follow the same procedure explained in the previous paragraph. In addition, mount adaptor n. 3 on the machine (as indicated in table n.1) How to restore the initial configuration (0.75 –... - Page 11 However, check that the adaptor is the appropriate size before proceeding to corking operations (if it is not compatible, please contact the technical office of FERRARI GROUP SRL and they will be able to produce a part to meet your requirements)
-
Page 12: How To Adjust The Pin For Standard Corks
Preliminary operations PRELIMINARY OPERATIONS How to adjust the pin for standard corks For successful bottle corking, i.e. so that the cork is flush with the bottle, you must adjust the 55 mm long pin (ø 19 or ø 15 as required) so that when the lever is in the horizontal corking position, the pin is flush with the lower end of the prisms (see the illustration below). -
Page 13: Operation
All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l. -
Page 14: Maintenance
Maintenance MAINTENANCE To keep the machine in perfect working condition it is very important that you • clean off any dust on the cork, Use a brush or compressed air to remove any cork residue that may • accumulate in the moving seat of the prisms, Keep the work area clean and free of any material that could obstruct •... -
Page 15: Storage And Demolition
Incineration is permitted in facilities equipped with post combustion and dust control systems before release into the environment All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l. -
Page 16: Overview Table 1
OVERVIEW TABLE 1... - Page 17 OVERVIEW TABLE 2 All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l.
-
Page 18: Exploded View Drawing
EXPLODED VIEW DRAWING... - Page 19 EXPLODED VIEW DRAWING All the rights are reserved, inclusive those of translation. It is forbidden to reproduce completely or in part this publication without the authorization of the FERRARI GROUP s.r.l.
- Page 20 Via Europa, 11 - 43022 Basilicagoiano - Parma (Italy) Tel. + 39.0521.687125 - Fax +39.0521.687101 E-mail: info@ferrarigroup.com Web: www.ferrarigroup.com...
Need help?
Do you have a question about the ZEUS and is the answer not in the manual?
Questions and answers