Wep - Airlink101 AP311W User Manual

WEP

The default security screen is the WEP screen. Here you can setup the WEP settings
for your wireless network. Note that these settings must be exactly the same as your
access point/wireless router.
Security Mode: Choose between WEP and WPA Pre-shared Key.
Default Transmit Key: Select a key to be the active key.
WEP Encryption: Choose between 64-bit and 128-bit encryption.
Passphrase: You can enter a passphrase and click on the Generate button and the
Repeater will automatically generate four WEP keys for you.
Key 1 – 4: Manually assign a passphrase for each key. If you selected 64 bits
encryption, enter 10 HEX characters (0-F) for each key. If you selected 128 bits
encryption, enter 26 HEX characters (0-F) for each key. For each key select either
Open System or Shared Key as your authentication.
Click on Save Settings to apply the changes.
16