Advertisement
Quick Links
Part No. 8010
Cordless Angle Grinder 20V
(without Battery)
Instructions
Battery & charger available separately,
please see Laser part numbers:
8007: 10-cell lithium-ion battery (4.0Ah).
8008: Battery charger (UK plug).
8009: Battery charger (Euro plug).
www.lasertools.co.uk
Advertisement
Summary of Contents for Laser 8010
- Page 1 Part No. 8010 Cordless Angle Grinder 20V (without Battery) Instructions Battery & charger available separately, please see Laser part numbers: 8007: 10-cell lithium-ion battery (4.0Ah). 8008: Battery charger (UK plug). 8009: Battery charger (Euro plug). www.lasertools.co.uk...
- Page 2 www.lasertools.co.uk...
- Page 3 Introduction This cordless angle grinder is part of the Laser professional workshop ‘one battery powers all’ cordless tool range with brushless motor technology designed and built for daily use. Cordless power is fast becoming the experts’ choice over mains and pneumatic, bringing extra safety to the workforce environment.
- Page 4 Components Ref. Description Spindle lock button Gear case ON / OFF switch Side handle Disc guard Battery Battery release button www.lasertools.co.uk...
-
Page 5: Specifications
Instructions Specifications Voltage No load speed 8000 RPM Disc diameter 115mm (4.5") Spindle thread size Noise 85-130 dB Weight (no battery) 1.6kg Weight (with battery) 2.2kg Operation: www.lasertools.co.uk... - Page 6 Instructions Fitting side handle: Instru www.lasertools.co.uk...
- Page 7 Instructions Fitting a disc: WARNING: Remove battery pack before fitting or removing grinding/cutting discs. • Always work with guard in place — adjust guard to suit work angle (Fig. 3). • Press spindle lock button to lock gearbox (Fig. 1). •...
- Page 8 Instructions Fitting a disc: www.lasertools.co.uk...
- Page 9 Instructions Fitting a disc: WARNING: Risk of hand and arm vibration injury. The operator (or employer) will need to carry out a health and safety risk assessment to determine a suitable duration for the use of the tool. This will be affected by the operator, the task, the material of the workpiece, and condition of tool.
- Page 10 Safety Warnings - please read • Ensure that all operators have read and understood these instructions. • Wear approved PPE: eye protection, ear defenders, gloves and protective clothing. If the grinding generates dust, wear a particle mask. • Ensure no loose clothing, ties, watches, jewellery, etc. Contain long hair. •...
- Page 11 www.lasertools.co.uk...
- Page 12 Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools.
- Page 13 Part No. 8009 Part No. 8009 Part No. 8009 Part No. 8009 Part No. 8009 Part No. 8009 Part No. 8009 Battery Charger 230V Mains 4amp Battery Charger 230V Mains 4amp Battery Charger 230V Mains 4amp Battery Charger 230V Mains 4amp Battery Charger 230V Mains 4amp Battery Charger 230V Mains 4amp Battery Charger 230V Mains 4amp...
- Page 14 first use. battery before first use. 1. Only use this charger with the correct Laser cordless tool range battery 1. Only use this charger with the correct Laser cordless tool range battery 1. Only use this charger with the correct Laser cordless tool range battery 1.
- Page 15 first use. before first use. 1. Only use this charger with the correct Laser cordless tool range battery Only use this charger with the correct Laser cordless tool range battery Only use this charger with the correct Laser cordless tool range battery...
- Page 16 Our products are designed to be used correctly and with care for the purpose for which they Our products are designed to be used correctly and with care for the purpose for which they Our products are designed to be used correctly and with care for the purpose for which they Our products are designed to be used correctly and with care for the purpose for which they Our products are designed to be used correctly and with care for the purpose for which they Our products are designed to be used correctly and with care for the purpose for which they...